3rd gen Aftermarket wheel thread

[Joelzy]

i'll toss another up for the retros.
found the wheels in Idaho for 40 bucks and crusty as can be but they cleaned up nice as hell if you like the old school look.

<img src="https://live.staticflickr.com/65535/50560203953_62d47c19c7_c.jpg" width="800" height="534" alt="7A119C2C-D14A-4868-8822-0787ADDD36BF">

American Racing AR26
Hankook dynapros 295/75/16
3D printed centercaps, TBD if they hold up

 

[fortysixandtwo]

i'll toss another up for the retros.
found the wheels in Idaho for 40 bucks and crusty as can be but they cleaned up nice as hell if you like the old school look.

<img src="https://live.staticflickr.com/65535/50560203953_62d47c19c7_c.jpg" width="800" height="534" alt="7A119C2C-D14A-4868-8822-0787ADDD36BF">

American Racing AR26
Hankook dynapros 295/75/16
3D printed centercaps, TBD if they hold up

Funny, I had a set of those wheels 15+ years ago and hated them. Now I look at them and think they actually look pretty damn good.

 

[MLHooker47]

1C54F0CE-17E8-47B1-A590-FAF4B266767D_1_201_a by Austin Scott, on Flickr

 

[Vansnxtweek]

SCS BR6
Stealth blue finish

17x9” offset -38

BFG MT KM3
285/70/17

Solid man, and the blue is so rare!!! Love it. I'm looking at these right now as we speak and by the time you answer they prob. will be sold out...but...

Do they rub at all?

I had a 3" Toytec previously and I had Ray10s but they were just 16x8s with -12mm offset. No rubbing whatsoever. Wondering about that -38mm.

Thanks!

 

[Formidable]

They are always sold out! Got this set used!

Minor rub full clock reverse. About to install solomotorsports LCA’s and 1.5” body lift. If these clear, will move up to 305’s for next tires. Will post results.

Solid man, and the blue is so rare!!! Love it. I'm looking at these right now as we speak and by the time you answer they prob. will be sold out...but...

Do they rub at all?

I had a 3" Toytec previously and I had Ray10s but they were just 16x8s with -12mm offset. No rubbing whatsoever. Wondering about that -38mm.

Thanks!

 

[Vansnxtweek]

Thanks man, post pictures for sure!!!

 

[Twan]

Black Rhino Boxer 17x8.5 -12 offset 4.27 backspacing and clears the 231 TBU no problem

 

[Vette468]

Cheap Craigslist Deal here .. Dick Cepek DC2s 16x8 -12 offset" with 285 75 16 Ironman Muds ...bought new tires and found the Numbers" # on the back of the rims.. Rims are 20 yrs old but still available, unbelievably..as i have a chipped bead on one.. ..on a 3" inch Rough Cuntry' Lift .. Lotta trimmin up Front ..itll rub if your tryin..

 

[Devbot]

Cheap Craigslist Deal here .. Dick Cepek DC2s 16x8 -12 offset" with 285 75 16 Ironman Muds ...bought new tires and found the Numbers" # on the back of the rims.. Rims are 20 yrs old but still available, unbelievably..as i have a chipped bead on one.. ..on a 3" inch Rough Cuntry' Lift .. Lotta trimmin up Front ..itll rub if your tryin..

Believe those are the same specs as my wheels and similarly had to do a bit of trimming and hammering. For what it's worth a buddy of mine who also had the same specs told me a while back to get some aftermarket UCAs to help caster the wheels out some more, since you lose a bit of adjustability when you lift with OEM control arms. Currently waiting for a good day to install some JBAs to test this out and confirm.

 

[Twan]

Believe those are the same specs as my wheels and similarly had to do a bit of trimming and hammering. For what it's worth a buddy of mine who also had the same specs told me a while back to get some aftermarket UCAs to help caster the wheels out some more, since you lose a bit of adjustability when you lift with OEM control arms. Currently waiting for a good day to install some JBAs to test this out and confirm.

Those are near identical specs to what I just posted above. With my SPC UCAs I have zero rubbing. I don't recall what setting they're on, but positive castor was added when it was aligned.

 

[Vansnxtweek]

Believe those are the same specs as my wheels and similarly had to do a bit of trimming and hammering. For what it's worth a buddy of mine who also had the same specs told me a while back to get some aftermarket UCAs to help caster the wheels out some more, since you lose a bit of adjustability when you lift with OEM control arms. Currently waiting for a good day to install some JBAs to test this out and confirm.

That is what I just put on mine and they were a great fit. Very happy! You will like them.

 

[AJPuleo23]

Motegi Trailite MR150
17 x 8.5 with a 0 offset
Backpace: 4.75
Yoko Geo MT 295/70R17



Cheers

 

[Vansnxtweek]

Man I hadn't seen those ^^^^^^^^ I like those a lot!!!

I keep seeing pictures of Runners lifted with steps on them still and its starting to make me think about trying mine back on again...

 

[AJPuleo23]

Man I hadn't seen those ^^^^^^^^ I like those a lot!!!

I keep seeing pictures of Runners lifted with steps on them still and its starting to make me think about trying mine back on again...

Thanks man!

I'd love to take them off but I have a feeling my wife might struggle to get into the truck after I went up with the lift and bigger wheels/tires.

I do love the look without them. Maybe someday...

 

[Twan]

I mean, it's OEM right?

I don't have any great glamour shots of them. I get routinely asked about them in parking lots. Have people ask me where I got them. Someone out there with a 4Runner must have them on besides me???

That's because you're posting in the wrong thread: OEM toyota wheel options/pics for 3rd gen 4runner *post em up*

 

[MrMaddoxP]

Motegi Trailite MR150
17 x 8.5 with a 0 offset
Backpace: 4.75
Yoko Geo MT 295/70R17



Cheers

Do you have any rubbing with that offset? I’m debating on getting those but I’m not sure yet.

 

[busmup808]

Sent from my iPad using Tapatalk

 

[Endlessblockades]

Thanks man!

I'd love to take them off but I have a feeling my wife might struggle to get into the truck after I went up with the lift and bigger wheels/tires.

I do love the look without them. Maybe someday...

They say beauty is based on symmetry, but you could remove the step board from your side and leave it on the wife's. You'd be seeing your side the most as you walk up to the driver's door, while she will have the step. I know.... I'd feel weird about it, too but you could give it a try.

 

[Devbot]

They say beauty is based on symmetry, but you could remove the step board from your side and leave it on the wife's. You'd be seeing your side the most as you walk up to the driver's door, while she will have the step. I know.... I'd feel weird about it, too but you could give it a try.

Some sliders would do the trick too! :guitar2:

 

[AJPuleo23]

Some sliders would do the trick too! :guitar2:

I think sliders will be one of my next mods.

I am fairly certain my flexplate is cracked however, so I guess I'll do the smart thing and take care of that first.