Factory parts. Vehicle these are all removed from had lower miles (130k) and everything is in good shape.
FRONT upper control arms. Good bushings, dirty, but good shape. SOLD!
Rear license plate garnish panel. Painted matte black, it's not perfect for these reasons; emblem was removed and small holes not filled perfectly, bondo or filler shrunk and left tiny dimples. The paint job is spray can and not flawless. It's a good piece with no cracks or damage, no broken tabs on the back. Good and useful, just giving the heads up! $25
REAR upper and lower control arms. Good bushings, no bends/rollovers that harmed them. SOLD!
OEM panhard/tracbar with good bushings. No rust, $30
Sport thin black flare trim for REAR DOOR ONLY! The two narrow trim pieces that clip to the door, good shape. No gouges or damage. $30
96-98 OEM headlight pair. Passenger side needs the retaining spring repaired, it is absent but light always stayed pretty close to perfect still. Drivers side is perfect. No cracks, no broken tabs. Complete just bolt in and connect harness to the bulb. $50 for the pair
4x4 control ecu factory for 98-02 vehicles as I researched. $50 only ones on ebay were $80+
Front IFS differential. Rig had 130k miles roughly when pulled, stock unmodified 4:10 unit. Good seals, both drain an fill plug spin freely. $100
LOCALS TO Seattle/Portland area due to shipping inconvenience;
Aftermarket bug guard for 96-02 4runner/others? hood. Complete, not much to say, it's black and bolt's on. SOLD
96-98 center console, moon mist blue/grey. Complete, lid latches and nothing is broken. Complete, $20
96-98 front bumper and marker lights. Metal structure only, missing the lower plastic fascia section. Truck came this way, it's black and rust free. Marker lights are nice without damage. Doing me no good, $20 for all of it?
Location is OLYMPIA, WA area.
Pictures of anything available upon request or I will take them and upload shortly.
FRONT upper control arms. Good bushings, dirty, but good shape. SOLD!
Rear license plate garnish panel. Painted matte black, it's not perfect for these reasons; emblem was removed and small holes not filled perfectly, bondo or filler shrunk and left tiny dimples. The paint job is spray can and not flawless. It's a good piece with no cracks or damage, no broken tabs on the back. Good and useful, just giving the heads up! $25
REAR upper and lower control arms. Good bushings, no bends/rollovers that harmed them. SOLD!
OEM panhard/tracbar with good bushings. No rust, $30
Sport thin black flare trim for REAR DOOR ONLY! The two narrow trim pieces that clip to the door, good shape. No gouges or damage. $30
96-98 OEM headlight pair. Passenger side needs the retaining spring repaired, it is absent but light always stayed pretty close to perfect still. Drivers side is perfect. No cracks, no broken tabs. Complete just bolt in and connect harness to the bulb. $50 for the pair
4x4 control ecu factory for 98-02 vehicles as I researched. $50 only ones on ebay were $80+
Front IFS differential. Rig had 130k miles roughly when pulled, stock unmodified 4:10 unit. Good seals, both drain an fill plug spin freely. $100
LOCALS TO Seattle/Portland area due to shipping inconvenience;
Aftermarket bug guard for 96-02 4runner/others? hood. Complete, not much to say, it's black and bolt's on. SOLD
96-98 center console, moon mist blue/grey. Complete, lid latches and nothing is broken. Complete, $20
96-98 front bumper and marker lights. Metal structure only, missing the lower plastic fascia section. Truck came this way, it's black and rust free. Marker lights are nice without damage. Doing me no good, $20 for all of it?
Location is OLYMPIA, WA area.
Pictures of anything available upon request or I will take them and upload shortly.
Last edited:
