4th Gen (03-05) T4R Front Plate Bumpers

P

pelfreybilt

New member
4th Gen (03-05) T4R Front Plate Bumpers (Aluminum or Steel)


NOTE:2003-2005 model 4Runner requires blinker cutouts & blinker light purchase for placement inside bumper

03-05 4Runner Front Plate Bumper
Base Aluminum Plate Bumper
Base Weight: 55# | Center Hoop 60# | Full Hoops 65#

Base Steel Plate Bumper
Base Weight: 110# | Center Hoop 115# | Full Hoops 120#
 
Last edited:
Register to hide this ad
Good lord please put out a rear bumper for the 4th gens that removes the rear crossmember for a decent departure angle. Shit, I'll take time off to drive out and you can use my truck for the guinea pig.
 
StormChaseTV said:
sweet bumper. I like how it overhangs on the sides.

What is the difference between the 03-05 and 06-09 bumper?
Click to expand...

03-05 has led turn signal holes & lights included, as the stock bumper does, where as the 06-09 does not. :)
06-09 has additional clearance for the grille that the 03-05 does not
 
I installed my [MENTION=111262]pelfreybilt[/MENTION] aluminum plate bumper last weekend. I love it!

yoda_pelfreybilt_bump_install_001.jpg


I can't wait for their rear bumper. ...no, literally I can't wait and I might have to go another direction.
 
grapemilk said:
I installed my [MENTION=111262]pelfreybilt[/MENTION] aluminum plate bumper last weekend. I love it!

yoda_pelfreybilt_bump_install_001.jpg


I can't wait for their rear bumper. ...no, literally I can't wait and I might have to go another direction.
Click to expand...

it looks beautiful!! Email me this photo please?
we would love to earn your business on the rear-we'll be releasing it this summer!!! #worththewait!!! :)
 
pelfreybilt said:
Yes! Right now we are finishing the 2016 Tacoma build, then will be starting on the 5th Gen 4Runner rear bumper, then going to the 4th Gen... should be able to release this summer :)
Click to expand...

Hopefully it will happen earlier than planned....been waiting on one for a few years and just about ready to pull the trigger.
 
sub'd for the 4th gen rear with swing out. You guys are local enough to save me some shipping costs so I'm definitely curious to see what you come up with.
 
I asked about the 4th gen rear bumper on their FB page and the reply was that they didn't have one on their list to build....guess I will be looking somewhere else
 
momo.75 said:
I asked about the 4th gen rear bumper on their FB page and the reply was that they didn't have one on their list to build....guess I will be looking somewhere else
Click to expand...

Sorry, our plate is full. we're starting with the 5th Gen 4Runner rear bumper... and when he designs it, Tyler is hoping to make it accommodate the 4th Gen as well-but won't know until he gets both rigs apart. If time is of the essence, we completely understand your need to shop elsewhere. We can only do so much. My father is dying of cancer and our business has tripled in the past year, so we've had to take a step back and re-evaluate our processes & procedures to insure that things are running more smoothly. So needless to say, new product lines aren't at the top of our priority-especially moving backwards. However, we are hopeful that the 5th Gen rear will work with the 4th Gen, so everyone is happy happy happy! :)
 
You must log in or register to reply here.

Members online

Total: 6,895 (members: 3, guests: 6,892)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top