4th Gen Armor Thread 2.0
- Thread starter Inv4drZm
- Start date
Inv4drZm
Senior Member
I need their washer bottle tank!! Sick!
I can remember seeing a post from them saying they finally found someone local to them that will allow for them to make a specific 06-09 version and we should see something around April. Can't remember where but I know I saw it cause I got real excited.
08SprtEdtn4wd
New member
If they do end up making that bumper, Imma get me one for sure!!!
Awesome and very helpful thread! the time spent is much appreciated!
I am looking to replace a few parts (initially just the hood and front bumper) and figure as long as I'm replacing the front bumper anyways might as well go aftermarket. Anyone have specific suggestions? Hoping to stay under 1k... We'll see if that happens haha
I am looking to replace a few parts (initially just the hood and front bumper) and figure as long as I'm replacing the front bumper anyways might as well go aftermarket. Anyone have specific suggestions? Hoping to stay under 1k... We'll see if that happens haha
Here is something a little different!
We had this custom front plate cut out for a customer of ours recently. It will be going on her SAS 4th gen build on 40's. If you would like to follow the progress of her build, check her out on instagram @domnisoara.yota . We're very excited to see this powder coated and installed on her 4th gen!
IMG_7717 by Brandon Faliszewski, on Flickr
We had this custom front plate cut out for a customer of ours recently. It will be going on her SAS 4th gen build on 40's. If you would like to follow the progress of her build, check her out on instagram @domnisoara.yota . We're very excited to see this powder coated and installed on her 4th gen!
IMG_7717 by Brandon Faliszewski, on FlickrHere is the (mostly) final product! She is still going to add some highlights to the cut out designs as some of the detail was lost in the powder coating process but overall we are both extremely happy with the end result!
https://www.coastaloffroad.com/2003-2009-4runner
received_10160115890600085 by Brandon Faliszewski, on Flickr
received_10160115890195085 by Brandon Faliszewski, on Flickr
https://www.coastaloffroad.com/2003-2009-4runner
received_10160115890600085 by Brandon Faliszewski, on Flickrreceived_10160115890195085 by Brandon Faliszewski, on Flickrwilliamteichroeb
Member
Here is the (mostly) final product! She is still going to add some highlights to the cut out designs as some of the detail was lost in the powder coating process but overall we are both extremely happy with the end result!
https://www.coastaloffroad.com/2003-2009-4runner
Excited to see her rear that you guys made when it gets back from powdercoating! It’ll be a good build for sure!
LordAbdullah
New member
Here is something a little different!
We had this custom front plate cut out for a customer of ours recently. It will be going on her SAS 4th gen build on 40's. If you would like to follow the progress of her build, check her out on instagram @domnisoara.yota . We're very excited to see this powder coated and installed on her 4th gen!
Are you guys planning on building a more hybrid style bumper in the future? Kind of a mix of tube/prerunner and some plate
roadsterboy85
New member
Here is the front bumper that I made. The winch plate area is 1/4" and the rest is 3/16". Each piece in the base is interlocked with the next piece so it should be plenty strong 
Im working on the back bumper now.
Im working on the back bumper now.Attachments
Last edited:
HCWatson997
New member
Here is the (mostly) final product! She is still going to add some highlights to the cut out designs as some of the detail was lost in the powder coating process but overall we are both extremely happy with the end result!
https://www.coastaloffroad.com/2003-2009-4runner
How much for base bumper?
We are just doing plate style bumpers at this time. We may offer hybrids with tubing side wings in the future though!
The base bumper comes in at just under $450USD. You can find the full details and pricing here: https://www.coastaloffroad.com/3rd-gen-4runner/4th-gen-4runner-high-clearance-plate-bumper
Let me know if you have any questions!
dammit_collins
New member
Here is the (mostly) final product! She is still going to add some highlights to the cut out designs as some of the detail was lost in the powder coating process but overall we are both extremely happy with the end result!
https://www.coastaloffroad.com/2003-2009-4runner
Excellent work!
Pics, my guy!
Here is the front bumper that I made. The winch plate area is 1/4" and the rest is 3/16". Each piece in the base is interlocked with the next piece so it should be plenty strong
View attachment 284086
View attachment 284087
View attachment 284088
View attachment 284089
View attachment 284090
View attachment 284091
Looking amazing!
2006 4runner SR5 4WD V6 Shadow Mica
153,000
FLnative
New member
Here is the front bumper that I made. The winch plate area is 1/4" and the rest is 3/16". Each piece in the base is interlocked with the next piece so it should be plenty strong
View attachment 284086
View attachment 284087
View attachment 284088
View attachment 284089
View attachment 284090
View attachment 284091
What kind of snorkel is that?
Relentless Front Bumper
I haven't seen a whole lot of people rocking the Relentless Fab redesign, so I thought I'd share mine. I really liked the look of it in pictures and it was one of the cheaper
and lighter options for steel bumpers so that's mostly what drove me to get it. Plus, I got it for 15% off on the labor day sale.
It did take a bit longer than expected to arrive because I ordered it on Labor Day with an 8-10 week lead time with an added 2-3 weeks if ordered with powder coating (so 10-13 weeks). I also added the turn signals
a little late, but I can't see that taking a whole lot of extra time (but what do I know?). I bought it Labor Day weekend and it arrived Jan 25, so that's more like 22 weeks?
I'm not sweating it, but that was considerably longer than the estimate.
As for the product itself, I am absolutely loving it, the way it fits is perfect, it had a super easy install, approach angle is fantastic, and I think it looks great. I also decided to upgrade tires and get
a winch at the same time, so now I'm rocking Nitto Ridge Grapplers in 285/75/17, with a Smittybilt 9500lb winch that is yet to be installed.
I haven't seen a whole lot of people rocking the Relentless Fab redesign, so I thought I'd share mine. I really liked the look of it in pictures and it was one of the cheaper
and lighter options for steel bumpers so that's mostly what drove me to get it. Plus, I got it for 15% off on the labor day sale.
It did take a bit longer than expected to arrive because I ordered it on Labor Day with an 8-10 week lead time with an added 2-3 weeks if ordered with powder coating (so 10-13 weeks). I also added the turn signals
a little late, but I can't see that taking a whole lot of extra time (but what do I know?). I bought it Labor Day weekend and it arrived Jan 25, so that's more like 22 weeks?
I'm not sweating it, but that was considerably longer than the estimate.
As for the product itself, I am absolutely loving it, the way it fits is perfect, it had a super easy install, approach angle is fantastic, and I think it looks great. I also decided to upgrade tires and get
a winch at the same time, so now I'm rocking Nitto Ridge Grapplers in 285/75/17, with a Smittybilt 9500lb winch that is yet to be installed.
Attachments
08SprtEdtn4wd
New member
And... Its official!!!!
Here is it Ya'll!!! The one I been waiting for!!!!
4th Gen (06-09) 4runner Lo-Pro Winch Bumper | C4 Fabrication
This bad boy will be installed on my rig (after flat black powder coat of course), soon as I get her out of storage in October!!!
Been waiting for this for about 2 years!!
Here is it Ya'll!!! The one I been waiting for!!!!
4th Gen (06-09) 4runner Lo-Pro Winch Bumper | C4 Fabrication
This bad boy will be installed on my rig (after flat black powder coat of course), soon as I get her out of storage in October!!!
Been waiting for this for about 2 years!!
Similar threads
