• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

4th Gen Light Bars for LED Bars or Round Lights - NM

rsingh0405 said:
After this closesout, are you not going to make anymore?
Click to expand...

I will be doing orders the first two weeks of each month. So after the 15th, you will need to wait until 1 Mar to order again. I do this because I have to place large orders with the laser cutter, so this allows me to build up an order. I am just a guy, not a shop so I don't have a lot of cash to throw at making big orders and having an inventory. I will cut a few extras just in case someone wants to scoop one up in a hurry.
 
MojaveMadMan said:
I will be doing orders the first two weeks of each month. So after the 15th, you will need to wait until 1 Mar to order again. I do this because I have to place large orders with the laser cutter, so this allows me to build up an order. I am just a guy, not a shop so I don't have a lot of cash to throw at making big orders and having an inventory. I will cut a few extras just in case someone wants to scoop one up in a hurry.
Click to expand...

Ah I see. Sounds good, I will be buying one really soon :bigok:
 
Little added bonus for you Style D guys!!!! After some inquiries from another member I figured out that you can also fit a 31.5" wide light bar between the tabs of the Style D, and in the same position as the Style A. So all of the Style D bars will have extra holes for you to mount a stealth bar behind the lower grill along with your round lights if you desire!!!

Pics to come, just got an email from my laser cutter and parts will be cut and shipped to me this week.
 
When some of you get version A or B, I'd love to see some more pics. Especially of version B.
I'm also curious how much the the plastic blocks light on version A.
 
Just wanted to give a little update. My laser cutter was swamped so they are running a little behind. They should be shipping out the cutting tomorrow, so I am hoping to have it over the weekend to build them. I might run a couple days over my goal of the end of the month (doesn't help it's a short month haha). I will let you guys know when I get parts in hand so I can send final invoices.
 
MojaveMadMan said:
Just wanted to give a little update. My laser cutter was swamped so they are running a little behind. They should be shipping out the cutting tomorrow, so I am hoping to have it over the weekend to build them. I might run a couple days over my goal of the end of the month (doesn't help it's a short month haha). I will let you guys know when I get parts in hand so I can send final invoices.
Click to expand...

Thanks for the update. For Style D, can you tell me the distance between the two middle mounting holes on the tabs? Hope that makes sense.
 
swanny said:
Thanks for the update. For Style D, can you tell me the distance between the two middle mounting holes on the tabs? Hope that makes sense.
Click to expand...

For those who requested evenly spaced tabs they will be 8" apart. The best way to place them is you decide what diameter light you are going to use and add 1" for spacing. So 7" light gets 8" spacing, 5" light gets 6" spacing and so on. This will allow for 1" between each light, which is enough room for you to point them in any direction without contact. If my standard 8" is not what you want just let me know and I will adjust your tabs.
 
MojaveMadMan said:
For those who requested evenly spaced tabs they will be 8" apart. The best way to place them is you decide what diameter light you are going to use and add 1" for spacing. So 7" light gets 8" spacing, 5" light gets 6" spacing and so on. This will allow for 1" between each light, which is enough room for you to point them in any direction without contact. If my standard 8" is not what you want just let me know and I will adjust your tabs.
Click to expand...

I think that will be perfect for me. I'm not entirely sure what I will put on yet so just keeping them even is easy. Thank you!
 
Got the laser cutting yesterday and now I have a mountain of parts to build! Did my first test builds today with the stealth and part of the tube bars. Everything is fitting perfect and these are going to turn out super nice!



I got the stealth fully test fit tonight. I even did a super simple test of the light output that people were asking about. This is a cheap Amazon 30" bar that isn't aimed and my trying to hold the wires on the battery and take a pic at the same time, so keep that in mind, haha.





No lights


Just the bar


And here are the base brackets for the tube version. They fit great and I will be ready to get the tube on there for final build up and pics.



Last, please bear in mind this is my first run of these so there is a little extra set up involved this run. I know I missed my deadline for end of the month but I am working as fast as life allows with the job/wife/kids. I have plans to build up everyone's parts on Saturday morning so that I can get them boxed up and send out correct final invoices. Those on the list, if you can please send me your shipping address that will help me get things out faster!!! Thanks everyone who is buying and supporting, and thanks for the patients on round one! [MENTION=109843]montijo505[/MENTION] [MENTION=105471]ColoRig[/MENTION] [MENTION=117347]TerryGip[/MENTION] [MENTION=119190]staged2[/MENTION] [MENTION=117408]Oneluv13T4R[/MENTION] [MENTION=51033]97BlackAckCL[/MENTION] [MENTION=85601]swanny[/MENTION]
 
Got the Style D's made yesterday. Final parts being welded today and everything that is paid will be shipped on Monday. Speaking of that I sent out final invoices to everyone I had addresses for, waiting for 2 more. Please PM me your address if you haven't already. Here are some pictures!

This is the Style D, with the optional 30" LED Bar mounted like I mentioned before. The Round light is an HID I had on the shelf and I just set it on top of the bar because I didn't want to drill out someones tab to mount this light. As you can see though, there is a ton of room for just about any size light. You just have to let me know if you want a spacing larger then the 8" spacing I do standard which is set up for a 7" diameter light.








 
Update for everyone.

First for those who are awaiting shipment. I will have your products to UPS tomorrow at my lunch break. I had some military obligations pop up on Sunday evening and today that precluded me from getting them out today. I apologize for the delay! But they will be out tomorrow.

For anyone who potentially wants one in the future, my situation has changed. Due to my military roll changing and my responsibilities to my family, I will no longer make any new ones. However, I did have some extras cut so if you want one you are still in luck while I have these.

I have parts on hand for the following styles and quantities listed below. If you want one let me know and I will send you an invoice. It will be one week time after you pay for me to weld it up and get it shipped out. Probably faster but I never know what my schedule is like so this will relieve any missed expectations.

Style A - 6 on hand ($13 flat rate shipping in US)
Style B - 6 on hand ($13 flat rate shipping in US)
Style D - 7 on hand (UPS, variable depends on where you live, around $30)

Sorry if this is a disappointment to some but I just have other things that take priority for me. Thanks to everyone who has purchased one or helped with these and thanks to those who buy what I have left to sell, haha!!!
 
Last edited:
LED light bar on style D?

Is it possible to get style D with just two tabs welded on for a 30" LED light bar? I know this style is really made for multiple round lights, but I'm wanting to mount a LED bar up a little higher. I am not a huge fan of the light output from behind the lower grill. If this is possible I'd be going the Amazon light bar route.
 
You must log in or register to reply here.

Members online

Total: 593 (members: 1, guests: 592)

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top