• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

4th Gen Light Bars for LED Bars or Round Lights - NM

Shambilambi5 said:
Hey Mojave - what's the difference between the flush and stealth mount? Just the overall length of the bracket?

I'm worried about flush mount living in the city and the utter lack of parking skills people have so I'm thinking I'll go stealth to protect the light but like the flush look better.

Would it be possible for me to order the flush mount and drill the "stealth" mounting hole for now. And then one day I could move it out to the "flush" mounting hole?
Click to expand...

Here is the flush mount with a curved light bar. It not as flush to the bumper with a straight one but right where the grill is. Imagine mine with a straight bar. Probably could barely see it.

bangers+runner-albums-bangers+runner-picture35139-perfect.jpg
 
Bangers Runner said:
Here is the flush mount with a curved light bar. It not as flush to the bumper with a straight one but right where the grill is. Imagine mine with a straight bar. Probably could barely see it.

bangers+runner-albums-bangers+runner-picture35139-perfect.jpg
Click to expand...

Thanks for sharing that picture to help!

As far as re drilling, you absolutely could drill holes back an inch or two no problem. You will still have to at least notch your lower grill for the mounts as they will hit the grill. I could also modify one so that the light bar sits 1" back from the normal flush spot. You would still get the look of a flush one, but it will be set back a little bit. This will require you to remove or cut out the lower grill like the flush mounts require.

Let me know!
 
Still have plenty in stock if anyone is interested in getting one today! If you want one of my products and some LED light combos please see my group buy for pricing!
 
toyotatech84 said:
i would love the flush kit, but a front plate is a legally required where i live. Any recommendations for how to overcome this?
Click to expand...

Im il IL also and I have never had a plate on my truck in 350,000 thousand miles with limo tint all the way around and I have never been bothered once about it.
 
Code2 said:
Why do you need brackets roll like the rest and use the already mounted brackets provided by toyota.

Mines been mounted 2 years straight and no issues
most clever thread yet on mounting it
http://www.toyota-4runner.org/4th-gen-t4rs/139354-stealth-led-light-bar-install.html
Click to expand...

I have been wanting to make a mount similar to this. A complete package that has everything so people don't have to make anything and a little stronger so it won't vibrate. I will probably do the R&D on this after Thanksgiving.

Code2 said:
So when you gonna start making some brackets for pods on the pillars :roll:

HINT HINT
Click to expand...

I am a dealer for Cali Raised LED and they make a nice mount already. They are out of the office until Monday but I will confirm from them that they mount on the 4runner and get you a price! A lot of people make these kinds of mounts already, I like making mounts that aren't on the market yet. That s why I don't make the other style windshield mounts either. Either way I can take care of you if you want either!
 
Alright what the heck ill post a picture too.

Got the brackets in today man I love you made it a snap to put on.

Tip of the day take the front cover off life will be a lot easier and faster.

I got the flush mount and will say I like being able to adjust the light bar up and down with a simple turn of a allen bolt now.

Any ways start to finish 30 minutes not including painting which i did watching tv in the garage


Excuse my mess of a garage right now its being cleaned out and prepped for someone to come in and drywall it and doing the flooring on it and install cabinets all over the place for me.

And yes there is three motorcycles in the garage and yes they are mine. the fourth one is in the living room :O) since its my price and joy and most expensive one
 

Attachments

  • IMG_0852.jpg
    IMG_0852.jpg
    152.5 KB · Views: 388
  • IMG_0853.jpg
    IMG_0853.jpg
    128.6 KB · Views: 417
Code2 said:
Alright what the heck ill post a picture too.

Got the brackets in today man I love you made it a snap to put on.

Tip of the day take the front cover off life will be a lot easier and faster.

I got the flush mount and will say I like being able to adjust the light bar up and down with a simple turn of a allen bolt now.

Any ways start to finish 30 minutes not including painting which i did watching tv in the garage


Excuse my mess of a garage right now its being cleaned out and prepped for someone to come in and drywall it and doing the flooring on it and install cabinets all over the place for me.

And yes there is three motorcycles in the garage and yes they are mine. the fourth one is in the living room :O) since its my price and joy and most expensive one
Click to expand...

Looks great! How did you mount the one on the roof rack?
 
So I actually have been working on a deal over the last month with my LED company to carry my products on their site. I have also been working on legitimizing my business and been working on building this into a company. My website is in work, and all my products will soon be available at Apexlightbars.com. Until then I am still taking orders via PM on here.

With my new site and with selling my parts to a distributor, I am in the process of making some changes to suit these new needs. These changes are ultimately best for you guys, I think you will enjoy!

- LED Bar Mounts will come powder coated black now
- All LED Bar mounts will have free shipping in the US
- Combo pricing will be slightly better ($35 off instead of $30 off)
- And best of all, my price is NOT changing on my mounts, so still $100

Basically I have to manufacture a much larger quantity at a time, which bring my costs down and allows me to add more features for the same price.

My tube version remains unchanged as these are not going into mass production at this time. Thought I will still be taking orders and making them at my current price point and with no powder coating as I can't do large batch runs.

I am also extending my product line to Tacomas if anyone wants one haha.

I will be powder coating my current inventory this week and will be offering the new pricing effective immediately!

Thank you to everyone who purchased one previously and allowed me to get to this point. I know the price includes better features now and your support has allowed me to make these changes and support our community.

If anyone has any questions at all please let me know! I have updated the first post to show the new details!
 
You must log in or register to reply here.

Members online

Total: 5,950 (members: 2, guests: 5,948)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top