Interesting...use of a long distance 4Hi and CDL to coax into 4Lo. Wonder if anyone here having insight would venture a guess as to why this worked...???!!!My 4Lo would not work and just beeped at me for MONTHS after I bough my 08.
I kept trying and trying.
We recently had a warmish spring day and I had a long highway jaunt in front of me.
I went ahead and ran 4Hi for about 50 miles, alternately engaging the center diff on and off.
When I got to my destination, I tried to engage 4Lo... WENT RIGHT IN WITH NARY A BEEP!
I’ve since taken to engaging it every day to the end of my alley as I leave the house.
Persistence is key!
Sent from my iPhone using Tapatalk
Warmed up the thickened grease, and the electric motors over came the mechanical resistance and poof 4lo.Interesting...use of a long distance 4Hi and CDL to coax into 4Lo. Wonder if anyone here having insight would venture a guess as to why this worked...???!!!
I have tried switching during periods of hot weather, never made a difference. However, have not tried running 4Hi over a distance, in hot weather, or for that matter repeatedly switching the CDL on/off. Correct me if wrong, but doesn't the truck need to be stopped to switch the CDL? If possible on the fly, would be risky to do at higher speeds.Warmed up the thickened grease, and the electric motors over came the mechanical resistance and poof 4lo.
Both my 4runners were bought with non functioning 4lo, and both started working over the course of the summer with persistent working of the dash switch. Took a few months of messing around, but much less expensive than paying for a unneeded repair.
Only costs time..... and if gets fubar from trying, well you were spending the money anyhow.
I have tried switching during periods of hot weather, never made a difference. However, have not tried running 4Hi over a distance, in hot weather, or for that matter repeatedly switching the CDL on/off. Correct me if wrong, but doesn't the truck need to be stopped to switch the CDL? If possible on the fly, would be risky to do at higher speeds.
I have tried switching during periods of hot weather, never made a difference. However, have not tried running 4Hi over a distance, in hot weather, or for that matter repeatedly switching the CDL on/off. Correct me if wrong, but doesn't the truck need to be stopped to switch the CDL? If possible on the fly, would be risky to do at higher speeds.
thank you, over the last few years sure i have read and forgotten that more than once...2hi to 4hi on the fly under 62 mph
4hi to 4lo stopped in neutral
CDL on/off anytime, though best used on the lawn, snow, sand or other surface that allows slippage.
To quote that cartoon, ya got ta work it, work it.....
The Toyota ADD 4WD's I've owned crunched going into 4LO 99% of the time, and that's with fresh gear lube. Makes you cringe when you hear it, yeah? The manual transfer case, manual front hubs were better.Mine had been stuck but freed up with perseverance.
It goes easily now, but 4Lo makes a bit of a crunchy noise when it engages.
That Ok?
Sent from my iPhone using Tapatalk
Has anyone seen an improved mpg-s while in 4Hi on 5th gen?
June reminder.
Any tips on what finally worked?Mine had been stuck but freed up with perseverance.
Any tips on what finally worked?
Thanks, I do remember seeing that.Scroll back a bit.
I picked a warm day and a long freeway run to cycle though 2hi, 4hi and center diff lock on and off a bunch for about 90 minutes.
When I got off the highway, 4Lo engaged on the first try.
Sent from my iPhone using Tapatalk