98 SR5 - The "Dirt Duster" build

welp its finnaly happened, you have done a mod i just cant get on board with, and dont like(its your truck so its kind of a mute issue i know). i dont care for the exterior bedlining up that high... i know why you did it and so it makes it a little better, but i still think it takes away so much from that beautiful paint. :blah::blah: but you still somehow managed to make it look its best considering!

what happened to your windshield?

Well that just too damn bad Isaac! hahaha No offence taken. No but seriously, that's the beauty of it all, we all get to build these things to suite our individual needs. I hope you still plan on visiting this thread, despite you dis-interest in the bedliner line chosen ;) lol

did i miss what your instagram name is? I love it your pics man, and love the new truck! OMG!

Thanks man! "r_addison" on IG. I'm not on there as much as the forums but still....

This thread is going far off topic from 3rd gens and needs to be closed...

:jk:

Damn you! haha You guys still got a Rubicon trip in the planning stages? I'll be in Washington/Oregon @ the end of April/Early May and we should meet up and hit the trails!
 
Why have I not been given details?! I'm still trying to get a move to CO planned...

I thought you said you couldn't make it last month?

We're going next weekend if you can make it! lol

Well, if Addison is coming down. Then you guys should convoy down here, then we can go to the Con in April/May. EXCEPT I'm not sure if we can because there will be too much snow (not sure if it's open).... but we can still go?
 
We have one planned now if you'll be coming to Norcal around that time!

?!?!?! Have any dates?

let us know when you come down, id be willing to break some stuff on on the trail trying to keep up... :bored:

lol Once I get my trips plans solidified I'll post up over here and see if any T4R'ers can meet up. I''l be heading south from Alberta to Moab, then heading east to DV, then North up through Cali and into Oregon/Washington.

Why have I not been given details?! I'm still trying to get a move to CO planned...

CO... so many trips to do.... Holy Cross?

I thought you said you couldn't make it last month?

We're going next weekend if you can make it! lol

Well, if Addison is coming down. Then you guys should convoy down here, then we can go to the Con in April/May. EXCEPT I'm not sure if we can because there will be too much snow (not sure if it's open).... but we can still go?

Yah I'm coming down in the spring but understand I might be somewhat limited due to the time of year. As above I'll be doing Moab, DV, Norcal, oregon/washington.

I might be willing to do it as long as the trail is open and depending on spring thaw and snow conditions. I would definitely stay off the Con' though if it was officially closed... that trail has so much bad publicity and so much work has been made to keep it open this long, it's not worth the risk.
 
?!?!?! Have any dates?


I might be willing to do it as long as the trail is open and depending on spring thaw and snow conditions. I would definitely stay off the Con' though if it was officially closed... that trail has so much bad publicity and so much work has been made to keep it open this long, it's not worth the risk.

No dates as of yet, the idea just popped into my mind about 10 minutes ago when you mentioned traveling outside of Canada lol

You'll definitely need to cruise by Chico so we can get some alcohol in our blood.

Do phones in Canada work in the U.S.? Or do you need a Mexico calling card :flipoff: :lmao:
 
No dates as of yet, the idea just popped into my mind about 10 minutes ago when you mentioned traveling outside of Canada lol

You'll definitely need to cruise by Chico so we can get some alcohol in our blood.

Do phones in Canada work in the U.S.? Or do you need a Mexico calling card :flipoff: :lmao:

Hahah so it's been in planning stages for a lllloooonnnngggg time. I'll let everyone know when my dates are firm. Stoked to put some miles on the truck!

Do your cell phones receive morse code? I'll beep you a message.:canada:
 
Hahah so it's been in planning stages for a lllloooonnnngggg time. I'll let everyone know when my dates are firm. Stoked to put some miles on the truck!

Do your cell phones receive morse code? I'll beep you a message.:canada:

hahahaha!

Lemme know the dates when you get em figured out sir!
 
:canada: lol Roadtrips to the states are easy for canadians because gas is so much cheaper for them....

ha, all kidding aside, that will be an awesome, long cruise! :car:
 
Truck looks great!!

Love the liner following the lines of the truck and the minimalistc front bumper. Can't wait to see the rear!
 
Addison,

I could get you hooked up with a guy who knows the Cascades like no other, if you are interested in that area of Oregon. Hell, I'd love to tag alone if you'd be in the area. Let me know!
 
Lol, speaking of porn, well photo porn in general, I was just creeping your flickr page. Lots of great shots in there! Thanks for dropping in Jared.

I just checked out your recents photos. Right back at you. You're taking some really good shots.
 
Truck looks great!!

Love the liner following the lines of the truck and the minimalistc front bumper. Can't wait to see the rear!

Thanks Quinn! You get that ARB thrown on your T4R yet?

Addison,

I could get you hooked up with a guy who knows the Cascades like no other, if you are interested in that area of Oregon. Hell, I'd love to tag alone if you'd be in the area. Let me know!

Ooohhh tell me more! haha Yup I would love to hit up the woods of Oregon. I was looking into the Evens Creek area already but am open to ideas. Maybe shoot me a PM and we'll chat.

Got out wheeling yesterday! Didn't take as many photos as I usually do... I guess I was just taking in the whole experience more as I dont get to the mountains as much as I used to. Funny how you appreciate the finer things so much more once your circumstances change. It was just good to smell the fresh air and be out with some friends. Despite the lack of flex shots, the trail was actually fairly technical. About 10" of fresh snow with an icey layer underneath that kept us cringing everytime we were off camber. I nearly slid into several trees. The Kevlars were wicked in the snow though, no complaints. I had them aired down to 8 psi most of the day which is probably as low as I will go until I am on beadlocks, and even then, I wouldnt air down this low in the summer on dry terrain. My observations are that the 80 is definitely LARGER than the 4Runner but it's quote a bit more comfortable offroad especially in the off-camber sections. It doest lean near as much as the 4Runner. It's a tank, you can feel all that weight all the time, the truck has a mind of it's own sometimes when things get slippery where the 4Runner was for sure more agile, despite the turning radius being way better in the 80.

Jeff's little pickup that could. This thing killed it on the trail today!

20121102-IMG_2010.jpg by RickaShay24, on Flickr

Ron being a boss in the "garden"

20121102-IMG_1999.jpg by RickaShay24, on Flickr

Tom post-wheel scratching

20121102-IMG_1994.jpg by RickaShay24, on Flickr


20121102-IMG_2018.jpg by RickaShay24, on Flickr

Did I say that it was gorgeous out there today?

20121102-IMG_2021.jpg by RickaShay24, on Flickr


20121102-IMG_2028.jpg by RickaShay24, on Flickr

Wide shot of Dave dropping into the creek

20121102-IMG_2033.jpg by RickaShay24, on Flickr


20121102-IMG_2034.jpg by RickaShay24, on Flickr


20121102-IMG_2037.jpg by RickaShay24, on Flickr

This was TIGHT... inches to spare on either side

20121102-IMG_2046.jpg by RickaShay24, on Flickr


20121102-IMG_2049.jpg by RickaShay24, on Flickr

Winter Wonderland

20121102-IMG_2060.jpg by RickaShay24, on Flickr

EDIT: I just thought I would share something I forgot to mention. After and during this trail everyone was mentioning how tight and overgrown it was, and how their trucks were getting scratched. I laughed.... at them. LineX doesnt get scratched ;) hahaha
 
Last edited:

Members online

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top