Addicted Offroad's Project: 100 Kilos (of the good stuff)

[AddictedOffroad]

So, I only know of a handful of legit 4th gen 4runners around that are built. We'll be adding this one to the list. This rig came to me rather stock earlier this year from a customer in Denver. Here are the specs:

2006 4runner Limited 4x4. V8, auto, 3" Icon lift.

We used it to build our 4th gen prototype front bumper on it. So, here are pics of it at that point:

Now, here is the rest of the plan.
Front:
SAS using a soon to be prototype'd 3-link kit
14" coilovers
Dropout center section
Diamond axle. 72" WMS-WMS (yes, wider than full width). 9.5" Land Cruiser center section. Mini truck outers. ARB Air Locker, 4.88s

Rear.
Custom 3-Link rear. Hopefully a production kit soon.
12" coilovers
Diamond Axle. 10.5" Tundra drop out. 36 spline full floater. Dana 60 FF hubs/outers. Retain factory Toyota disc brakes. 4.88s, ARB Air Locker. This will be the Biggest, Baddest, Toyota axle on the planet. 70" WMS-WMS.

Tcase:
TBD

Tire/wheels
37x12.5x17 Mud Terrains. 5" backspaced 17x9 wheels

Custom Rear tire carrier bumper.

We'll be starting on this as soon as I can clear a spot on one of the lifts since the axles came in this week.

 

[HHIRunner]

This should be fun

 

[4Running Daily]

Subscribed. What happen to your black first gen? Still around?

 

[AddictedOffroad]

Subscribed. What happen to your black first gen? Still around?

No. Its gone. I have an 85 xtra cab that will be getting some love at some point.

 

[foxtrot]

That's goig to be awesome, is the front 3 link going to be made into a kit? I wish I had the money to hand you my keys and do something like this haha. Addicted off-road credit card?

 

[AddictedOffroad]

That's goig to be awesome, is the front 3 link going to be made into a kit? I wish I had the money to hand you my keys and do something like this haha. Addicted off-road credit card?

We will be looking into doing just that. This will NOT be a cheap kit. It will include the axle, shocks, all tabs/brackets, towers, etc. It will be a weld together kit as well.

 

[t-man]

So, I only know of a handful of legit 4th gen 4runners around that are built. We'll be adding this one to the list. This rig came to me rather stock earlier this year from a customer in Denver. Here are the specs:

2006 4runner Limited 4x4. V8, auto, 3" Icon lift.

We used it to build our 4th gen prototype front bumper on it. So, here are pics of it at that point:

Now, here is the rest of the plan.
Front:
SAS using a soon to be prototype'd 3-link kit
14" ORI struts
Dropout center section
Diamond axle. 72" WMS-WMS (yes, wider than full width). 9.5" Land Cruiser center section. Mini truck outers. ARB Air Locker, 4.88s

Rear.
Custom 3-Link rear. Hopefully a production kit soon.
12" ORI Struts.
Diamond Axle. 10.5" Tundra drop out. 36 spline full floater. Dana 60 FF hubs/outers. Retain factory Toyota disc brakes. 4.88s, ARB Air Locker. This will be the Big, Baddest, Toyota axle on the planet. 70" WMS-WMS.

Tcase:
3.0 Atlas two speed tcase. Twin stick Cable shifts.

Tire/wheels
37x12.5x17 Mud Terrains. 5" backspaced 17x9 wheels

Custom Rear tire carrier bumper.

We'll be starting on this as soon as I can clear a spot on one of the lifts since the axles came in this week.

Sub'd!! Literally almost exactly what I have been looking at lately! Will the front be something offered after you guys figure out everything? Excited!! opcorn:

 

[NateMob]

Sub'd!! Literally almost exactly what I have been looking at lately! Will the front be something offered after you guys figure out everything? Excited!! opcorn:

We will be looking into doing just that. This will NOT be a cheap kit. It will include the axle, shocks, all tabs/brackets, towers, etc. It will be a weld together kit as well.

[MENTION=101553]t-man[/MENTION] , Already answered.

Glad to finally see this project getting talked about, cant wait to see this bad girl. Scott, You know what i'm interested in from this build! :hatsoff:

Nathan

 

[Martinjmpr]

Sweet! Is this going to replace the sick black 3rd gen you've been driving around for a while?

 

[t-man]

[MENTION=101553]t-man[/MENTION] , Already answered.

Glad to finally see this project getting talked about, cant wait to see this bad girl. Scott, You know what i'm interested in from this build! :hatsoff:

Nathan

I realized that afterwords. Was to excited to finish reading the responses. lol

 

[AddictedOffroad]

Sweet! Is this going to replace the sick black 3rd gen you've been driving around for a while?

I haven't been driving it. I drove it home a couple days to get it dialed in, but its been with the owner for a few months now. It did come back in last week for a new stereo, and some button ups.

 

[cacarbuff]

I want the SAS kit and the rear tire carrier. My money is ready and waiting for a rear bumper to match the front!

 

[wnelax04sr5]

I'm going to start saving for this kit now....

 

[vr4z06gt]

Subscribed. I can't wait to see it.

 

[Dylan]

I should have enough moolah saved up by the time I take my annual trek out to Vail this summer. I now will have a detour to make en route!

 

[Nyc-Runner]

Wow this is going one sick build!I remember you saying you had a 4th gen there that you were going to be doing a complete build on soon but Damn i didn't think it was going to be of this magnitude! I can't wait, and here i was this whole time just patiently waiting for you to build the rear bumper when you had this up your sleeve :thumb3:

 

[tH1e swiN1e]

I love the plate/tube combo with the front bumper. Cant wait to see this progress.

 

[28.]

Gawd i want this bumper!!!!

 

[J053619]

So how about putting your custom tire carrier on the top of the list

 

[NuclearN8]

Just in time for tax refund season. Well played sir, well played.