ajohnson's 85 build

sam24th said:
Hey Andy if you need help sometime hit me up. Ive been helping a friend of mines SAS a Double cab 01 taco that had been wrecked. Trying to finish up most of the stuff today actually. We cut all the IFS stuff off his truck with my plasma cutter.
Click to expand...

Thanks Sam! I may hit you up if my friend is too busy to come over.
 
Well...

jehe9agy.jpg


qehyjapa.jpg
 
I'm pretty sure you are missing some critical front suspension components right now. lol Good luck on the sas! Lookin good! :thumb:
 
Slowly making progress. I cut the motor mounts with my grinder and cut off wheel. Got one side ground down and hit with a flap wheel. Should have it smooth by Sunday night.

aperyqaz.jpg


Hoping to start on the rear next week. Parts are on the way from LROR, and a Doug Thorley header from Summit.
 
ajohnson85 said:
Slowly making progress. I cut the motor mounts with my grinder and cut off wheel. Got one side ground down and hit with a flap wheel. Should have it smooth by Sunday night.

Hoping to start on the rear next week. Parts are on the way from LROR, and a Doug Thorley header from Summit.
Click to expand...

Dude you shoulda went with LCE lol I voted for your pile. I've got a LROR package waiting on me. Did you know they sell a breather relocation kit?
 
4Running15 said:
Dude you shoulda went with LCE lol I voted for your pile. I've got a LROR package waiting on me. Did you know they sell a breather relocation kit?
Click to expand...

What up homie! Preciate the vote :thumb3:

I went with the thorley cause it was cheapest, with free shipping from summit. And supposedly gives better bottom-end gains with the 4-2-1 design. When I slap a new intake together and get the exhaust redone, hopefully I'll see some decent gains.
 
Interested in seeing how the battery tray works for you also. I an considering getting one for my pickup for my dual batt setup. Looks like your making decent progress. Faster progress than the SAS that Ive been working on. Ive only been able to work on it one day a week.
 
sam24th said:
Interested in seeing how the battery tray works for you also. I an considering getting one for my pickup for my dual batt setup. Looks like your making decent progress. Faster progress than the SAS that Ive been working on. Ive only been able to work on it one day a week.
Click to expand...

I'll give it a test fit as soon as it shows up. I already removed the air box to pull the steering box.

My progress feels so slow, and I am absolutely sick of grinding. I still need to hit the bottom of the frame on each side. I worked 73 hours last week so my spare time is very limited right now. I'm scratching my Memorial Day weekend deadline. I will kill myself trying to have it ready by then.
 
ajohnson85 said:
I'll give it a test fit as soon as it shows up. I already removed the air box to pull the steering box.

My progress feels so slow, and I am absolutely sick of grinding. I still need to hit the bottom of the frame on each side. I worked 73 hours last week so my spare time is very limited right now. I'm scratching my Memorial Day weekend deadline. I will kill myself trying to have it ready by then.
Click to expand...

Ha, it can't be any slower than the progress we been having on the taco SAS. We have been working on the thing for about 3 months now. First couple of months were slow though since it was mostly body work and cutting all the old IFS stuff out and makign sure the frame is straight. Truck was involved in a VERY bad front end collision and basically the whole front clip had to be replaced. I think the worse part of the SAS was frenching int he shackle hangers and cutting/grinding off the old IFS stuff. Looks like you got the grinding and cutting part done. Welding is pretty easy. Not to thread jack but heres a teaser of what Ive been working on. Im sure the owner will post a build thread on tacomaworld once we finish it.

 
Nice! I was gonna ask for some pics of the project. Is that ttran from TW? I think he showed a pic of this a couple weeks ago.

I still have some grinding left up front. I didn't realize what a b***h it would be.
 
ajohnson85 said:
Nice! I was gonna ask for some pics of the project. Is that ttran from TW? I think he showed a pic of this a couple weeks ago.

I still have some grinding left up front. I didn't realize what a b***h it would be.
Click to expand...

Yep that's Tim's (ttran) Taco from TW. We went to school together and go to the same college now. I've been helping him do the SAS and bodywork on it the past few months. Its shaping up nicely. The lift itself is done. Just need to do the rear lift now and set the steering up. Hes planning on doing a build thread soon on TW.

Yea the grinding part is the worse of it. We went through 3 flap discs and a few grinding discs. I think the 80s era rust coating is a lot worse than the coating on the 01 taco though. Atleast the one on my pickup was aweful. It was like damn glue and I ate up 4 discs per frame rail.
 
You must log in or register to reply here.

Similar threads

Fiffa
FS: 3rd Gen 4Runner Limited, Vancouver, WA, $13k OBO
Replies
2
Views
3K
Fiffa
Fiffa
C
Build Decisions
Replies
2
Views
2K
NachesPass4x4
N
VA4Runner09
FS 4th Gen - Overland Build - $27,000 - Denver, CO
Replies
2
Views
2K
rarferngully
R
rpjtremblay
FOR SALE, OG 5th Gen 2013 4Runner Limited Overland Build, $22.5k, New Jersey
Replies
0
Views
2K
rpjtremblay
rpjtremblay
Orlyg1521
FS: 5th gen 2011 Trail 4runner for sale $18k / Portland,OR
Replies
0
Views
1K
Orlyg1521
Orlyg1521

Members online

No members online now.
Total: 205 (members: 0, guests: 205)

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top