Anybody running KO2's on their 1st gen?

[Griswald]

Just installed BFG KO2's 31 / 10.5 / 15

Anyone else running these?
Where do you like the PSI?

(Soft top on for the summer, so truck is pretty light.
I feel like I need to let some air out)

 

[Cali 4runner]

32x11.5x15 Bfg Ko2

Ome rear leaves with a leaf removed. Stock torsion bars up front. Bilstein shocks.

I just did a chalk test and found the factory 26psi front looked good and about 28-29psi rear is good. Factory calls for 35psi rear which is too much.

 

[4runner_kid]

I was running them on my old 2nd gen. Loved them. Don't remember how much air pressure i was running tho.

 

[Griswald]

did a chalk test. 34 PSI in the front looks good

I went down to 27 PSI in the rear and had about a 1/2 inch on each side of the tire.

Figure I'll leave it there, accounting for extra weight in the back (people, cargo, etc)

With the hard top canopy off, really takes a lot of weight of the back of the 1st gen.

Tire shop had them at 38...I was like "man, these things are slippery!":frusty:

 

[hydrabyte]

slightly larger, 33x10.5x15, but running ~32 PSI on all 4.