Bilstein 5100 / TOYTEC 112620 combo

[EL3V8TE]

Sure will bro. 4 wheel parts will be doing my install.

Only thing is that I have some slight rubbing when turning left and right. It's minor. I'm gonna let the tires rub the heck out of the mud guards until I can't hear it no more. Lol I upgraded the tires to 285/70/17

2016 SR5PRO// 17X8.5 NV METHODS// LT265/70/17 GOODYEAR DURATRACS// PLASTIDIPPED EMBLEMS AND ROOF RACK//SYLVANIA ZEVO LED INTERIOR LIGHTS//TRD PRO FRONT GRILL AND GARNISH//XENONDEPOT LED KIT// PHILIPS LED ULTINON FOG LIGHTS//

 

[96706RROMJP]

Thanks bro. Yeah I'm pretty happy with it. Keep me posted wanna see yours once it's all done.

2016 SR5PRO// 17X8.5 NV METHODS// LT265/70/17 GOODYEAR DURATRACS// PLASTIDIPPED EMBLEMS AND ROOF RACK//SYLVANIA ZEVO LED INTERIOR LIGHTS//TRD PRO FRONT GRILL AND GARNISH//XENONDEPOT LED KIT// PHILIPS LED ULTINON FOG LIGHTS//

When you get a chance ,can you get your measurements from ground to fenders?

 

[EL3V8TE]

When you get a chance ,can you get your measurements from ground to fenders?

Yeah for sure I'll do it tomorrow

2016 SR5PRO// 17X8.5 NV METHODS// LT265/70/17 GOODYEAR DURATRACS// PLASTIDIPPED EMBLEMS AND ROOF RACK//SYLVANIA ZEVO LED INTERIOR LIGHTS//TRD PRO FRONT GRILL AND GARNISH//XENONDEPOT LED KIT// PHILIPS LED ULTINON FOG LIGHTS//

 

[96706RROMJP]

Yeah for sure I'll do it tomorrow

2016 SR5PRO// 17X8.5 NV METHODS// LT265/70/17 GOODYEAR DURATRACS// PLASTIDIPPED EMBLEMS AND ROOF RACK//SYLVANIA ZEVO LED INTERIOR LIGHTS//TRD PRO FRONT GRILL AND GARNISH//XENONDEPOT LED KIT// PHILIPS LED ULTINON FOG LIGHTS//

Thanks bro.

 

[airjordan]

Looks good! I think I am going to end up getting the same setup for my TEP, how much should the install cost?

 

[96706RROMJP]

I finally got to install the springs. I did the install all by myself and man it was tough doing it alone. I'm really happy how it turned out and looks the way I hoped it to be. Here's a photo. I used the superflex in the rear and the toytec/eibach in the front with the 2nd notch on the bilstein. Looking forward to seeing how yours turn out.

2016 SR5PRO// 17X8.5 NV METHODS// LT265/70/17 GOODYEAR DURATRACS// PLASTIDIPPED EMBLEMS AND ROOF RACK//SYLVANIA ZEVO LED INTERIOR LIGHTS//TRD PRO FRONT GRILL AND GARNISH//XENONDEPOT LED KIT// PHILIPS LED ULTINON FOG LIGHTS//

Look what we started...lol

 

[hawaiianryan]

Howzit OP. How much did 4WheelParts quote you for install? I'm thinking of going the same route as you. Mahalos!

 

[GabrielM]

I have the 112620 /Bilstein with Superflex for the rears in my garage since last summer and they will be installed this Thursday.

[MENTION=137319]EL3V8TE[/MENTION] did your setup leveled the truck? Any rake? I tow a lot and prefer to level when towing than having a nose high. Nice truck BTW.

 

[EL3V8TE]

I have the 112620 /Bilstein with Superflex for the rears in my garage since last summer and they will be installed this Thursday.

[MENTION=137319]EL3V8TE[/MENTION] did your setup leveled the truck? Any rake? I tow a lot and prefer to level when towing than having a nose high. Nice truck BTW.

[MENTION=111795]GabrielM[/MENTION] Thank you. Yes,my set up is leveled. No Rake. When I went with this set up I was hoping not to get a rake. I pretty happy with the stance. My measurements are from the ground to fender are

Front Left 38" (I forgot to install the 1/4 spacer)
Front Right 39"
Rear Right 39 1/2"
Rear Left 39 1/4

Hope this helps.

 

[wookiecrisp]

[MENTION=111795]GabrielM[/MENTION] Thank you. Yes,my set up is leveled. No Rake. When I went with this set up I was hoping not to get a rake. I pretty happy with the stance. My measurements are from the ground to fender are

Front Left 38" (I forgot to install the 1/4 spacer)
Front Right 39"
Rear Right 39 1/2"
Rear Left 39 1/4

Hope this helps.

Love it. Maybe I missed it, but what was the overall gain in front with the 112620s @ .85? 3.x"?

I did mine at 0" in the front w/ a 1/4" spacer, with 1.5" spacers in the rear (see my build for my measurements); that is giving me 2.25" gain in the front after about 1K miles.

 

[EL3V8TE]

Love it. Maybe I missed it, but what was the overall gain in front with the 112620s @ .85? 3.x"?

I did mine at 0" in the front w/ a 1/4" spacer, with 1.5" spacers in the rear (see my build for my measurements); that is giving me 2.25" gain in the front after about 1K miles.

Thank you. I actually did see your set up as well because you also went with the same front springs when I was looking for a suspension set up, which I really liked. I forgot to take before measurements before installing the springs. I was just to excited to get it installed lol. But based on the research I read on bilsteinlifts.com, they said it was going to be 3".

Your stance looks good too.

 

[wookiecrisp]

Will have to consider this once I feel the uncontrollable need to raise it even more.

Once I get the sliders and skids from RCI installed, and go through a summer of Colorado trails... I'll see where I'm at settling-wise and if I should do the 0.85" option with superflex in the rear so I can go the full 3/2

Hoping [MENTION=131404]96706RROMJP[/MENTION] tells us his before and after numbers.

 

[EL3V8TE]

Will have to consider this once I feel the uncontrollable need to raise it even more.

Once I get the sliders and skids from RCI installed, and go through a summer of Colorado trails... I'll see where I'm at settling-wise and if I should do the 0.85" option with superflex in the rear so I can go the full 3/2

Hoping [MENTION=131404]96706RROMJP[/MENTION] tells us his before and after numbers.

Either way you go, the height on your 4runner looks good. I was originally gonna go with your same whole setup, but took a chance to do the 3/2 lift. I told myself it it didn't look and feel right i was going to switch it out lol. Came out the way i hoped it would. Ill see how it settles after a while to see if it drops down a little bit. Skids and a different slider are on my wishlist as well. Just using the Nfabs for the kids and the wife to get in and out for now. once the kids are big enough its coming off lol.

 

[Peakbagger]

Front view/rear view

Elev8te:
Can you post a pick from the front and rear views of your rig? Would like to see how much your tires extend. Looks awesome man.

 

[EL3V8TE]

Elev8te:
Can you post a pick from the front and rear views of your rig? Would like to see how much your tires extend. Looks awesome man.

This is all I have for now I can take more tomorrow with better angles.

2016 SR5PRO// 17X8.5 NV METHODS// LT265/70/17 GOODYEAR DURATRACS// PLASTIDIPPED EMBLEMS AND ROOF RACK//SYLVANIA ZEVO LED INTERIOR LIGHTS//TRD PRO FRONT GRILL AND GARNISH//XENONDEPOT LED KIT// PHILIPS LED ULTINON FOG LIGHTS//

 

[Peakbagger]

Tight!

Thanks for the pics and the info on the lift. Again, sweet lookin' rig. Will keep an eye out for it...

 

[EL3V8TE]

Thanks for the pics and the info on the lift. Again, sweet lookin' rig. Will keep an eye out for it...

Thanks and no prob. [MENTION=118223]Peakbagger[/MENTION] Couldn't have gotten great ideas if it wasn't for this awesome forum and people.

 

[kpinthebay]

Man your rig is sick...your sig says 265. In the pics, are those 285s?

Sent from my SM-N920V using Tapatalk

 

[96706RROMJP]

Will have to consider this once I feel the uncontrollable need to raise it even more.

Once I get the sliders and skids from RCI installed, and go through a summer of Colorado trails... I'll see where I'm at settling-wise and if I should do the 0.85" option with superflex in the rear so I can go the full 3/2

Hoping [MENTION=131404]96706RROMJP[/MENTION] tells us his before and after numbers.

Sure will, just counting the days till my install appt.

 

[96706RROMJP]

Howzit OP. How much did 4WheelParts quote you for install? I'm thinking of going the same route as you. Mahalos!

I actually bought all the parts through toytec and just had 4 wheel parts, labor and alignment =$560