riceandpho
Elite Member
hi guys, this is my test, i bought a headlamp from ebay and costed me 30 bucks lol, well here it goes, blacking it out on this is kinda hard, hard part is not to get glue on the glass, but here it is. first u preheat the oven at 250, then u get ur headlight, removing all rubber and screws out, after the oven is all preheated and done, put the headlight in and bake for 15 mins, also watch it too, i didt watch my lights kuss i had to shit and it kill 10 mins lol, so after 15 mins pass, wear some gloves and take out the light and find a spot to start seperating, after that, u see that the reflector are attatch to the plastic, while the trim is attatched to the glass, start takin out the screw on the trim and it should b 2 of them , now the hard part is taking it off the glass and not put any glue on it, best thing to remove the glue off the glass is use some arctic silver thermal remover, its some computer shit, it worked for me. anyways taking the other glass part off the trim is hard too and bcarful, after that u get some paint for plastic, i used what i had big mistake , but this is a test only, so u paint and let dry, then reassemble everything back. and pop it in the oven. well my lights are still apart now, will finish up later.
Last edited:
