Bonyfattony Build Thread

[Bonyfattony]

Updated 6/28/2015

Bonyfattony's Build thread​

New to the forum and I wanted to introduce you to my car! Well not necessarily new but I have lingered on the forum as a guest for quite awhile.

As of right now, this is how she sits!

<a href="http://s1275.photobucket.com/user/bonyfattony/media/D1BF4BAD-927C-4810-8502-87402811AA75_zpsfjhy8ztr.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/D1BF4BAD-927C-4810-8502-87402811AA75_zpsfjhy8ztr.jpg" border="0" alt=" photo D1BF4BAD-927C-4810-8502-87402811AA75_zpsfjhy8ztr.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/A31CBB6C-0DDE-4530-A2C7-860515277723_zpswbrsdkzy.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/A31CBB6C-0DDE-4530-A2C7-860515277723_zpswbrsdkzy.jpg" border="0" alt=" photo A31CBB6C-0DDE-4530-A2C7-860515277723_zpswbrsdkzy.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_1358_zpsxqwa2rxb.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_1358_zpsxqwa2rxb.jpg" border="0" alt=" photo IMG_1358_zpsxqwa2rxb.jpg"/></a>

This is the only picture I have of her stock.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/465937_3700242220165_905645551_o_zps173985cb.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/465937_3700242220165_905645551_o_zps173985cb.jpg" border="0" alt=" photo 465937_3700242220165_905645551_o_zps173985cb.jpg"/></a>

And then I found T4R.org. The only down side of a 4runner is wanting to mod it!

Modifications:

Suspension:
Icon Vehicle Dynamics Front Coilover 2.5
Icon Vehicle Dynamics Billet UCA
Icon Vehicle Dynamics Rear 2.0 Shock
Icon Vehicle Dynamics Rear 2" Coil Springs
Removed front swaybar

Wheels & Tires:
FN Wheels BFD
BFG All Terrain K/O 275/6518
Front 6 Piston Rotora Calipers
Rear 4 Piston Rotora Califpers
355mm Drilled and Slotted Rotora Rotors
Kics R40 Graphite 12x1.25 Lug Nuts
SpiderTrax 1.25 Black Spacers

Armor:
Shrockworks Single Bull Bar Front Bumper
Shorckworks 3 Tube Rock Sliders
BAMF LCA Skid Plates
Monster Hook MH-4

Lights
TRS 6000k HID Headlights
PIAA 510 Fog Lights Retrofit with TRS HID
Rigid Industries E-Series 40" Combo Light Bar
6000K Led Interior Swap
Black Front HeadLights

Exterior
15% Tint all around
50% Tint windshield
Jaos Satoshi Grille w/ Raptor Letters
Gobi Stealth Roof Rack w/ Ladder
Gobi Axe Mount
Shorckworks Fairlead
Daystar 3/8 Clevis Shackle w/Isolator

Performance
Doug Thorley Short Tube Tri-y Headers
TRD Dual Cat Back Exhaust
K&N Intake

Time some pictures: From the begining!

Just got the FN BFD 18x9 wheels in the mail and I could not be happier.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/image_zpscda559fb.jpeg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/image_zpscda559fb.jpeg" border="0" alt=" photo image_zpscda559fb.jpeg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/image2_zpsc40b573f.jpeg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/image2_zpsc40b573f.jpeg" border="0" alt=" photo image2_zpsc40b573f.jpeg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_4846_zps7e01deae.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_4846_zps7e01deae.jpg" border="0" alt=" photo IMG_4846_zps7e01deae.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_4848_zps0e698b6d.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_4848_zps0e698b6d.jpg" border="0" alt=" photo IMG_4848_zps0e698b6d.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_4847_zpsd372d4bf.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_4847_zpsd372d4bf.jpg" border="0" alt=" photo IMG_4847_zpsd372d4bf.jpg"/></a>

I have ordered my Shrockworks front bumper but everyone knows how long that takes to get...

More mods to come!​

 

[SDr6]

Looks great!

What size tire are you running?

 

[Bonyfattony]

Looks great!

What size tire are you running?

I am running 275/65/18. I originally had spacers with 2 inches in the front and 1 inch in the rear so I went with a smaller wheel size. Now I have the Icon stage 1 and regret not having 285/65/18.

 

[toyotatech84]

gorgeous!!!

 

[Henrici]

I'm loving those FN wheels. I've been looking at the counter steer type X.

 

[Bonyfattony]

gorgeous!!!

Thank you toyotatech84!

I'm loving those FN wheels. I've been looking at the counter steer type X.

I do too! I really enjoy the look of 18 inch wheels. i feel like theres a good balance of wheel and tire. You should hit up FN Wheels and ask for Dustin. He is super helpful and down to earth.

 

[Mytoy4]

Very nice!

 

[Bonyfattony]

Very nice!

Thanks! Mytoy4. There will be more to come!

 

[Bonyfattony]

Latest Mod the Rotora BBK Big Brake Kit 355x30

Just installed the Rotora BBK Big Brake Kit. This thing is straight over kill. Too much stopping power (which is a good thing).

Pictures don't do this thing justice.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_5177_zpsafd0548b.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_5177_zpsafd0548b.jpg" border="0" alt=" photo IMG_5177_zpsafd0548b.jpg"/></a>

Took off the existing rotor and caliper. One thing you should know is WD-40 saves lives.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_5203_zps6cd9083a.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_5203_zps6cd9083a.jpg" border="0" alt=" photo IMG_5203_zps6cd9083a.jpg"/></a>

I painted the center hub with caliper matte black paint so it would match my wheel. I also had to trim the dust shield for the rotor to fit.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_5188_zps6e0fec5b.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_5188_zps6e0fec5b.jpg" border="0" alt=" photo IMG_5188_zps6e0fec5b.jpg"/></a>

It took forever to install and bleed properly but came out amazing. This thing screams sex. Flushed it and used Dot 4 Castrol GTLMA brake fluid. I used about 64oz worth of fluid.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_5199_zpsd1f0ee3c.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_5199_zpsd1f0ee3c.jpg" border="0" alt=" photo IMG_5199_zpsd1f0ee3c.jpg"/></a>

Im loving how things are coming along.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_5202_zpsaaa51328.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_5202_zpsaaa51328.jpg" border="0" alt=" photo IMG_5202_zpsaaa51328.jpg"/></a>

More to come!​

 

[JustSomeName]

Just installed the Rotora BBK Big Brake Kit. This thing is straight over kill. Too much stopping power (which is a good thing).

Pictures don't do this thing justice.

how much was the big brake kit?

 

[Bonyfattony]

how much was the big brake kit?

It retails for $5500 front and rear. I made a deal with WhiteBeauty and he hooked me up. Awesome guy by the way. Too bad he switched to and Xrunner...

 

[Johnson51]

It retails for $5500 front and rear. I made a deal with WhiteBeauty and he hooked me up. Awesome guy by the way. Too bad he switched to and Xrunner...

That looks real bad ass my friend! But with a price that steep it would be hard to justify for me! Congrats!:clap2:

 

[Bonyfattony]

That looks real bad ass my friend! But with a price that steep it would be hard to justify for me! Congrats!:clap2:

I agree... but I got a good price for them and couldn't pass up on them. They are freaking amazing and my truck is coming together nicely.

 

[Bonyfattony]

San Diego 4runner Otay Trail

Took the 4runner off-roading with the San Diego 4runner crew at the Otay Lake Trail.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0246_zps13e66865.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0246_zps13e66865.jpg" border="0" alt=" photo IMG_0246_zps13e66865.jpg"/></a>

 

[Bonyfattony]

Shrockworks 3 link Rock Sliders

I came across a set of Shrockwork sliders on the forum and picked those bad boys up the following day. They were the 3 link powder coated rock sliders.

I immediately dismounted the stock running boards.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0289_zpsb486ec09.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0289_zpsb486ec09.jpg" border="0" alt=" photo IMG_0289_zpsb486ec09.jpg"/></a>

I called a buddy over and had them put on the following day. You would imagine 6 bolts would be pretty easy to do but it took us about 5 hours.... the bolt near the gas can is nearly impossible. Overall, the outcome came better than expected. I like how the powder coat is a semigloss and almost matches the original paint. It also gives the truck a more aggressive look.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0311_zps3bd116e4.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0311_zps3bd116e4.jpg" border="0" alt=" photo IMG_0311_zps3bd116e4.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0313_zpsade317f1.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0313_zpsade317f1.jpg" border="0" alt=" photo IMG_0313_zpsade317f1.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0314_zps3e5bd541.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0314_zps3e5bd541.jpg" border="0" alt=" photo IMG_0314_zps3e5bd541.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0321_zps4d400b31.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0321_zps4d400b31.jpg" border="0" alt=" photo IMG_0321_zps4d400b31.jpg"/></a>

​

 

[Bonyfattony]

Shrockworks Front Bumper Single Hoop

After waiting for 5 Months... I finally received my front bumper from Shrockworks. I will say, the wait is dreadful and long but you definitely get what you pay. It surely is quality over quantity. This thing is built to last.

I opted for the single hoop bumper. I prefer the look. I feel like it is more aggressive.

This is how it comes when delivered by UPS. It is extremely well packed and mounted directly to the pallet so there is no sway.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0300_zpsd34ef4d6.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0300_zpsd34ef4d6.jpg" border="0" alt=" photo IMG_0300_zpsd34ef4d6.jpg"/></a>

The front bumper was removed. This took about 3 hours to do.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0324_zpsbb743233.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0324_zpsbb743233.jpg" border="0" alt=" photo IMG_0324_zpsbb743233.jpg"/></a>

This definitely requires a second person to help put on. Her is the finished product.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0326_zps400d60ac.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0326_zps400d60ac.jpg" border="0" alt=" photo IMG_0326_zps400d60ac.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0328_zpsf514412a.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0328_zpsf514412a.jpg" border="0" alt=" photo IMG_0328_zpsf514412a.jpg"/></a>

 

[Bonyfattony]

My birthday came and the girlfriend got me some PIAA 510 headlights for the bumper and BAMF LCA skids. She is keeper for sure!

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0377_zps2377f91d.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0377_zps2377f91d.jpg" border="0" alt=" photo IMG_0377_zps2377f91d.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0264_zpsd94a4d16.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0264_zpsd94a4d16.jpg" border="0" alt=" photo IMG_0264_zpsd94a4d16.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0332_zps96837f12.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0332_zps96837f12.jpg" border="0" alt=" photo IMG_0332_zps96837f12.jpg"/></a>

 

[Bonyfattony]

BAMF LCA Skids

I received a set of BAMF LCA skids from the girl friend. I gotta that sucker mounted and install within a hour.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0330_zps4fd591cf.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0330_zps4fd591cf.jpg" border="0" alt=" photo IMG_0330_zps4fd591cf.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0331_zpsf2f9a94b.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0331_zpsf2f9a94b.jpg" border="0" alt=" photo IMG_0331_zpsf2f9a94b.jpg"/></a>

I drilled the front to have the bolt fit.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0334_zps56e4afae.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0334_zps56e4afae.jpg" border="0" alt=" photo IMG_0334_zps56e4afae.jpg"/></a>

Boom the finished product!

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0335_zps2a772deb.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0335_zps2a772deb.jpg" border="0" alt=" photo IMG_0335_zps2a772deb.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0338_zpsf950993f.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0338_zpsf950993f.jpg" border="0" alt=" photo IMG_0338_zpsf950993f.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0339_zpsae837e5c.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0339_zpsae837e5c.jpg" border="0" alt=" photo IMG_0339_zpsae837e5c.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0341_zpse4f42e24.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0341_zpse4f42e24.jpg" border="0" alt=" photo IMG_0341_zpse4f42e24.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0343_zps4bc72e2a.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0343_zps4bc72e2a.jpg" border="0" alt=" photo IMG_0343_zps4bc72e2a.jpg"/></a>

 

[Bonyfattony]

Piaa 510 hid retro fit

I did a HID retrofit on my PIAA 510 with TRS HID's.

I drilled into those bad boys. Theres no going back now!

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0357_zps3d598c40.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0357_zps3d598c40.jpg" border="0" alt=" photo IMG_0357_zps3d598c40.jpg"/></a>

I drilled a 1 inch hole and put a grommet in the middle to hole the bulb.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0358_zps515c51d1.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0358_zps515c51d1.jpg" border="0" alt=" photo IMG_0358_zps515c51d1.jpg"/></a>

Just like that, you have a PIAA HID retro fit.

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0360_zpsd61f91ec.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0360_zpsd61f91ec.jpg" border="0" alt=" photo IMG_0360_zpsd61f91ec.jpg"/></a>

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0362_zps34c1d3f3.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0362_zps34c1d3f3.jpg" border="0" alt=" photo IMG_0362_zps34c1d3f3.jpg"/></a>

Isn't she pretty?

<a href="http://s1275.photobucket.com/user/bonyfattony/media/IMG_0415_zpsa4bb4299.jpg.html" target="_blank"><img src="http://i1275.photobucket.com/albums/y441/bonyfattony/IMG_0415_zpsa4bb4299.jpg" border="0" alt=" photo IMG_0415_zpsa4bb4299.jpg"/></a>

 

[sr3tlaw]

I FOUND YOU lol

[MENTION=107754]Bonyfattony[/MENTION]

I think the 275/65R18 tires fit this well. Found this thread with a search as Im doing same ICON STAGE 1 with 275/65R18 stock wheels. No rubbing issues you have come across? I could be nuts but does it seem you have a slight rake with your front end dipping a tad lower than the rear?

Thanks!