BrianSD_42 Photo Journal Build Maintenance Thread

Congrats on the purchase of the bumper Brian! :bigok:

I've got to say that I am really looking forward to seeing how it pairs up w/the ARB. I debated the options for rear bumpers for a LONG time, and I always liked the Savage bumper. One of my biggest concerns was how it would match up w/a plate front, so your install will satisfy some long standing curiosity.

Did you happen to ask about spare tire fitment? Can you run a 285 spare under the truck w/that bumper? Can you run the stock spare?

BTW, thanks for the nods on the mudflaps. It's funny, in my thread I got exactly zero questions about them.
 
Just got back from Anza-Borrego weekend trip with TriumpthDog (Nathan) and some people from the San Diego Tierra Del Sol 4WD club.

Here is spliced the video!

Pics to follow.


<iframe width="1280" height="720" src="http://www.youtube.com/embed/_9EpAKwYNwo" frameborder="0" allowfullscreen></iframe>
 
Your rig is great! I've finally read through your thread after all the advice you've given me. I appreciate the details, the links, and the prices, as it gives me an idea of what to expect for future projects.

I do have a question regarding our SS 1.2 Kits. I ordered my SS 1.2 Alternate Kit last Thursday and am impatiently waiting for it. Does it really have everything I need suspension wise, or is there something I'm missing for a complete, safe lift? I'm a thorough person when it comes to research, so I just want to make sure I'm going about things the best way I can. I'll tell you what though---I'm so excited about these upgrades! :bravo:
 
I do have a question regarding our SS 1.2 Kits. I ordered my SS 1.2 Alternate Kit last Thursday and am impatiently waiting for it. Does it really have everything I need suspension wise, or is there something I'm missing for a complete, safe lift?
Click to expand...


Thanks for the compliment!

I followed Steve's advice for the install but ended up "going up a notch" when I added a front bumper. Steve advised me but it was after the install, so a few months later I had to do the front again.

If you let him know that you plan to add weight he should tell you to go "one notch" further than the instructions say. Do this even if you arent getting a front bumper yet because why do it twice. That is my 2 cents but ask Steve.

Some people have expanded on the SS 1.2a kit by adding droop protective cloth stops. Hard to explain but well documented in BigFishAllDay's 2001 4Runner thread (very long).

Besides the thread I haven't changed the suspension.
 
Hey man, I tried to send these questions to you as a private message, but it said your box was already full and could no longer accept new messages.

So your advice has been instrumental in helping me devise a build plan. I was lost at first and I'm now confident of my direction, both cuz of you, and this incredible forum. I have a few specific questions for you, if you don't mind.

In regards to the SS 1.2 Kit, you mentioned going 1 notch up from the original kit. What does this specifically entail? When I originally spoke to Steve, he said the kit could support an ARB-type bumper. I left him a message on Friday, but my kit had already shipped, and at this point I'm not driving my truck until receiving my suspension kit. Right now I'm driving my GF's car, so I'm anxious to get this all done. Do I need a heavier-duty strut? Would I have to end up replacing any of the parts that already come with the kit, or is it a matter or replacing additional parts not included?

What kind of lift can I expect from the SS 1.2 Alternate Kit? Will my truck have a raked look? Personally, I like the raked look.

I'm also having my shop install Hankook Dynapro ATs 305/70/16R. Will this suspension upgrade give me the necessary clearance to run those tires, or do I need a body lift as well? Something in the 1" to 1.5" range?

I'm having my shop look over my LBJs and brakes. If I need new brakes, would you recommend switching to the Tundra upgrade?

And lastly, just a general FYI, I'm installing new Denso sparkplugs and NGK wires. Obviously, my shop is going to be aligning my suspension and balancing my new tires. I already have an external tranny cooler. I've read through 4-Ripcord's 3rd Gen Buyer's Guide and it seems I've addressed most of the important issues. Is there any other specific maintenance you recommend addressing, or is it based on need at this point? Everything else seems to be in great condition for a vehicle with 131,000k on it. Thanks again man for all of your help.
 
Do I need a heavier-duty strut? Would I have to end up replacing any of the parts that already come with the kit, or is it a matter or replacing additional parts not included?

What kind of lift can I expect from the SS 1.2 Alternate Kit? Will my truck have a raked look? Personally, I like the raked look.
Click to expand...


Your lift would be exactly the same as mine and the other SS 1.2 guy's trucks.

Everything Steve sent is fine but I definitely suggest going exacy 1 notch above his default instructions. Steve tries to have it set just so that it "rides like a Cadillac" and can accomidate a ARB front bumper ... but once you add any other weight like a better skid plate or winch or sliders ... it will sag like mine and BFADs.

Solution: Going up one notch solves the problem but does make it a bit stiffer, Steve will confirm since I got it from him.


See here page 10:
http://www.toyota-4runner.org/3rd-g...-one-2001-sport-ed-trd-scd-10.html#post746123

You can pm me now; my inbox is cleared out.

BFAD's build is recommended by me as a must read because among other things he almost always lists the part number / model number / company / link (one of them) so that others can follow in his footsteps. This is highly useful and eliminates the need for lots of PMs or thread questions. I often go back to his thread to find a certain part number or detail.

:bat:
 
Last edited:
Anza-Borrego April TDS Trip Pictures



/ *** Testing out my new 16 MP Nikon F1.8, 24mm point-n-shoot camera *** /























































:lookout:
 
Last edited:
Pretty cool pics. I love the dusk photos where you see the amber color from the vehicles. How long was that trail ride?
 
Update:

I removed the following today
* rear tow hitch (which I painted and then put back on)
* rear bumper, all pieces
* Bud Built front skit plate
* Spare tire


I sanded, primed and painted the tow hitch satin black and then put it back on as a quasi-bumper.

I am still waiting for the Savage bumper to be finished and I won't be driving the 4Runner very much until then.

Although not particularly interesting, here are some pics of the truck with a bit less weight...






















:hatsoff:
 
Last edited:
Dang it feels almost like looking at my own 4runner...since we both went all black with ARB.

That's a sweet sweet camera as well and it shows quality in those beautiful photos.
 
You have one of the cleanest 3rd gen 4Runners I have ever seen! All the small paint projects, the meticulous washing and waxing, and attention to detail make all the difference in the world. Very nice truck!
 
You must log in or register to reply here.

Similar threads

F
MODS: I cannot access most pages of a thread; &quot;Forbidden&quot; error in browser
Replies
9
Views
26K
AuSeeker
AuSeeker
P
FS: 1996 3RD GEN 4Runner 4x4 | $6999 | Chicago, IL
Replies
2
Views
4K
pfeenstra
P
D
FS/T: 2006 4Runner V8 4WD Limited, rare 3rd row (SoCal)
Replies
10
Views
2K
rarferngully
R
xskydivingdudex
Xskydivingdudex’s Build Thread 2.0
Replies
1
Views
973
honda250xtitan
H
Fiffa
FS: 3rd Gen 4Runner Limited, Vancouver, WA, $13k OBO
Replies
2
Views
3K
Fiffa
Fiffa

Members online

No members online now.
Total: 3,095 (members: 1, guests: 3,094)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top