RandyBobandy
New member
This will be me if I ever have to replace a heater core
Brillos Builds
- Thread starter brillo_76
- Start date
This will be me if I ever have to replace a heater core
brillo_76
Elite Member
Oh boy. :/
This will be me if I ever have to replace a heater core
Sent from my SM-J337V using Tapatalk
brillo_76
Elite Member
I tell you from the looks of things. You have to remove the dash and a pile of other things get the heater core out. It's in the center and barried really in there. I take a closer photo next time I am working on it to show folks.
Now the blower motor is extremely easy to get to..
Sent from my SM-J337V using Tapatalk
19963.4lsr5
New member
My Cummins and grand Cherokee required the dash to be removed. I could do the truck in about 5 hours.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
brillo_76
Elite Member
I was just spoiled of the old 80s truck. They cores were easier. I just saw how barried the heating core in this dash assembly. It's in there. Probably a video on it floating around the internet.
Sent from my SM-J337V using Tapatalk
19963.4lsr5
New member
For the truck it was unplug a bunch of connectors, drop the steering column and unhook the temp control cable.
Sent from my iPhone using Tapatalk
brillo_76
Elite Member
Work day on the Parts mobile with [MENTION=318903]RandyBobandy[/MENTION]
Making great progress
The entire body harness is out. The heater core, Ac box and blend box is out. We have the entire body harness laying on the ground.
So soon we be pulling the engine out of it. As its Transmission and transfer case were removed years ago.
Making great progress
The entire body harness is out. The heater core, Ac box and blend box is out. We have the entire body harness laying on the ground.
So soon we be pulling the engine out of it. As its Transmission and transfer case were removed years ago.
Last edited:
El_Canyonero
New member
Sick build
brillo_76
Elite Member
19963.4lsr5
New member
What’s the front drivers rocker panel look like?
Mine is going south. If you can cut the front 2ft out before you junk the body.......
Sent from my iPhone using Tapatalk
Mine is going south. If you can cut the front 2ft out before you junk the body.......
Sent from my iPhone using Tapatalk
brillo_76
Elite Member
Sadly the rockers are gone. I check I might be able to salve a small section
Sent from my SM-J337V using Tapatalk
19963.4lsr5
New member
Sadly the rockers are gone. I check I might be able to salve a small section
Sent from my SM-J337V using Tapatalk
I need the front visible 8” 12”. Maybe also what’s behind the fender too.
Sent from my iPhone using Tapatalk
RandyBobandy
New member
Probably can’t even salvage that much from this one, I remember laughing when I saw the condition of the rockers
brillo_76
Elite Member
Oh it's a little Rusty. Huh [MENTION=318903]RandyBobandy[/MENTION] . We honestly dont know how it holding together at this point..
Sent from my SM-J337V using Tapatalk
RandyBobandy
New member
Oh it's a little Rusty. Huh [MENTION=318903]RandyBobandy[/MENTION] . We honestly dont know how it holding together at this point..
Sent from my SM-J337V using Tapatalk
I’ve torn my pants a couple times on pieces of the rocker sticking out, and I pretty sure I could kick the frame into two pieces
