Cleaning Wheel Wells??

techmen17

New member
So after I spend an hour cleaning my car to perfection, everything looks great...then I look down at my wheel wells and all I see is dull gray and brown caked dirt. (Or maybe I'm just being really OCD) I have taken it to the self serve car wash to pressure wash them, and sprayed them with some simple green and let them soak before spraying them down again. Which has helped, but there still not "clean". What do you guys do, if at all, to clean those wheel wells. Are there any products that are good for restoring/cleaning the plastic parts under there?

Worst case scenario, looks like I will just have to crawl under there with a good hard bristled brush and clean by hand...
 
Register to hide this ad
Worst case scenario, looks like I will just have to crawl under there with a good hard bristled brush and clean by hand...

That with the Simple Green will do the job. If it still looks dull, just spray it with some rattle can undercoating. It makes a really nice, subtle difference when the wheel wells are clean (All OCD sufferers know this)
 
I've heard that Meguiar's Hyper Dressing works pretty well.

But I just went the really cheap way and sprayed some undercoating in my wheel wells. I think it came out really nice.
 
what I do is clean with regular carwash shampoo (inside wheel well). I let air dry, then apply Armor-all (Back to Black, 404 protectant, whatever). After washing your runner several times, you will notice a difference. Dont forget that inside the wheel well is just plastic. My runner looks showroom new everytime I wash her. :)
 
Last edited:
So after I spend an hour cleaning my car to perfection, everything looks great...then I look down at my wheel wells and all I see is dull gray and brown caked dirt. (Or maybe I'm just being really OCD) I have taken it to the self serve car wash to pressure wash them, and sprayed them with some simple green and let them soak before spraying them down again. Which has helped, but there still not "clean". What do you guys do, if at all, to clean those wheel wells. Are there any products that are good for restoring/cleaning the plastic parts under there?

Worst case scenario, looks like I will just have to crawl under there with a good hard bristled brush and clean by hand...
do what I did, go to walmart and get some cans of the spray on rubber undercoating. works like a champ and looks great when dry.
 
So after I spend an hour cleaning my car to perfection, everything looks great...then I look down at my wheel wells and all I see is dull gray and brown caked dirt. (Or maybe I'm just being really OCD) I have taken it to the self serve car wash to pressure wash them, and sprayed them with some simple green and let them soak before spraying them down again. Which has helped, but there still not "clean". What do you guys do, if at all, to clean those wheel wells. Are there any products that are good for restoring/cleaning the plastic parts under there?

Worst case scenario, looks like I will just have to crawl under there with a good hard bristled brush and clean by hand...

Try using "Adam's all purpose cleaner " followed by " Adam's Undercarraige Spray" it will make it look like brand new.
 
I just use All Purpose Cleaner.

Some guy that was very detailed used a toilet brush to clean the wells.
 
I'm lazy these days...so I just use my Foam Gun

Quart Foam Gun on Full Foam
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/RFIILkkdqaA?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/RFIILkkdqaA?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

YouTube - Quart Foam Gun on Full Foam
 
Gilmour Foamaster II Foam Gun - Auto Detailing
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/ZEOw1HFN1J0?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/ZEOw1HFN1J0?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

YouTube - Gilmour Foamaster II Foam Gun - Auto Detailing
 
The Gilmour is fine and dandy, but it's like comparing a RAV4 to the 4Runner. ;): Thus that's a foam gun and this is a cannon. :)

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/7uXlEMGc_60?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/7uXlEMGc_60?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
 
Citrus degreaser and high pressure spray. Use hot water if it's really soiled. Protecting it is the key. Sonus trim and motor kote works well.
 
Elbow grease. I turn the wheels outwards and use an old towel and wash/wipe down the grit.

Me too. I use the car shampoo that I use with the body (I had a bad experience with Jeep grand cherokee wheels............they pitted and peeled on me after using chemicals .....simple green....and other products). Anyway, yeah, sometimes the most simplest way is the best way!:thumb3: oh, and I ALWAYS "cleaner wax" my rims.
 
I use surf city garage beyond steel wheel and tire cleaner only stuff That I actually use to CLEAN my tires works awesome on the wheel wells too cleans up beauty then either their tire shine or the meguiars hot shine :pimp: in the can with the 3 different settings for tire profile works awesome surf city makes a really good shine to for the price:surfer:
 

Members online

No members online now.

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service

Trending content

Back
Top