CodyX36's 1998 4Runner Build-Up Thread

257pxtz.jpg


Picked up a set of Landcruiser Coils, 7.5/8 wraps, should give me a good amount of rear lift and then will just have to crank up the adjustable fronts. The saggyness from the bumper, sub, tools, etc in the back just isn't looking good. Pictures to come when its all done.

did the cough medicine come free with the coils?
 
Valve cover gasket next weekend along with running a half can of Seafoam through. Steering rack polyurethane bushings within the next few weeks also.
 
Valve cover gasket plus all the other gaskets in there replaced, thanks a ton to A.Wilson013 for the extra hand, also did his valve cover set too! Spark plugs were changed also, plus I ran some seafoam through the intake. Decent amount of crap burned off, which is good. Also ordered the Jaos Spoiler from Burtman Industries, photos to come when that's installed.

valvecover.png~original
 
Got my fender flares painted, as soon as I get the caved in part of my driver side quarter panel fixed, it'll line up right and I can throw them on. Before and after pictures are below. Also put my TRD Off Road stickers on.

Before;
fenderflares.png~original


After, Painted with Krylon Fusion;
fenderflarespainted.png~original


TRD Sticker, Passenger Side;
trdsticker2.png~original


TRD Sticker, Driver Side;
trdsticker1.png~original
 
Do the stickers make it run any better? :jk:

I really like the build, and I hope that you add even cooler stuff for all of us to drool over!
 
Got my fender flares painted, as soon as I get the caved in part of my driver side quarter panel fixed, it'll line up right and I can throw them on. Before and after pictures are below. Also put my TRD Off Road stickers on.

Before;
fenderflares.png~original


After, Painted with Krylon Fusion;
fenderflarespainted.png~original


TRD Sticker, Passenger Side;
trdsticker2.png~original


TRD Sticker, Driver Side;
trdsticker1.png~original

Ebay for the stickers?
 
Alex painted them on for me.

But really, yes, got them for like 16 bucks from seller exzackly707 on ebay.
 
First off nice 4runner!!!
I was thinking about getting a flowmaster or a magnaflow for mine but I kinda got talked out of it. Do you get a lot of noise inside the vehicle from the exhaust?
 
No, the roar of the exhaust is perfect. Going down the road at 35mph it dies out and you can barely hear it with your music on. Taking off from a stop you can obviously hear it a little. It's just what I was looking for. I also went with stock pipes, just had the muffler shop chop my old one out and put that one on, in case you were wondering.
 
Took a trip up to Evans Creek yesterday with a few buddies, all was good, the main lower parking area was covered in snow, some spots up to 3-4 feet. Really weird because the road up and most of the trails were clean, must have been the trees catching a lot of it. Road up to the campground from parking area was insane, so we just traveled up 311. Met up with a guy who was coming down 311 when we were going up, told us to go only to upper 311 then come back down, because if you go up, then lower, we'd be screwed with the amount of rigs we had, and would have to all back down. Broke a window coming back down the trail, if some of you know the 'slick rock' part, which is right before the upper (scenic view) part of the trail, you'll know there is an inner side to take when going up to trail. The slick rock was covered in snow, looked like nobody has touched it this year, so we all went inner, which was fine on the way up. The way down is where I broke the window, there is a sharp left when going around the bend on that inner side, I got a little too close to the body, so I backed up, attempted to go wider, but was difficult with the angle, ended up clearing the part of the body that was close before, but having to turn more caused the back end to snag the root, which blew it out. In the end, a spotter would have probably saved me, learn from my mistakes though.

Here are a few pictures, last one is an older picture of the trail from a few years ago, now I'm about 90% sure the root I circled in red was the one that snagged my window. Could be off a little though.

JDM stance shot.
evans1-1.jpg~original


Can sort of see where Mt. Rainer is.
evans2-1.jpg~original


After the window accident.
evans3-1.jpg~original


Window gone.
evans4-1.jpg~original


The famous rear 4Runner flex shot.
evans5-1.jpg~original


Pretty sure that's the stump that got my window, that photo is from 2 summers ago I think. You can see where the trail starts to turn which is where I got caught up.
stump-1.jpg~original


Photo my buddy took.
538486_413312972030733_100000561011394_1438860_223111601_n.jpg~original
 
Last edited:
Alex, eat glass. :gun4:

Rickashay, it's a huge area, just a little too early in the year right now, I'm sure after a few weeks the snow will melt and all the trails can be accessible. And yes, but I honestly am kinda happy it was glass rather than a panel or door or something. :)
 
Rickashay, it's a huge area, just a little too early in the year right now, I'm sure after a few weeks the snow will melt and all the trails can be accessible. And yes, but I honestly am kinda happy it was glass rather than a panel or door or something. :)

I'm going to have to make my way out that direction one day to do some wheeling, I love Washington and Oregon. I know what you mean on the trails, I have been wheeling lots in my area in the snow this winter and it really does ad a whole new element and the snow reacts differently throughout the day depending on the temperature. LOL yah, I guess glass is a easy fix if you can find a donor for a decent price. I bashed my passenger door in November and it sucked....
 
Is your body panel bent at all? It kinda looks like it in the photos.

Looks like it was fun. Minus...
 
I'm going to have to make my way out that direction one day to do some wheeling, I love Washington and Oregon. I know what you mean on the trails, I have been wheeling lots in my area in the snow this winter and it really does ad a whole new element and the snow reacts differently throughout the day depending on the temperature. LOL yah, I guess glass is a easy fix if you can find a donor for a decent price. I bashed my passenger door in November and it sucked....

You should, we have quite a few places here in the PNW to take your truck, pretty much every type of terrain you can think of, whether it's mud, snow, sand, simple forest service roads, etc. Yeah I think I'll just have Safelite repair it, we use them through work so I can get a discount, plus the lifetime warranty would be nice. :D

Is your body panel bent at all? It kinda looks like it in the photos.

Looks like it was fun. Minus...

It was bent from the previous trip to Evans Creek actually, I had a PDR (Paintless Dent Repair) guy at work take it out for me, he did a pretty good job, said it would look around 80 percent new, which I think it did. Left a few dings sticking outwards, but from a distance it's hard to tell, just looks like any repaired fender would. Click below, you can see the damage of the dent before.

http://www.toyota-4runner.org/3rd-g...998-4runner-build-up-thread-2.html#post993799

Why is there a gap between the rear bumper and the 4runner?

Body lift. When I had the rear bumper made, I told the guy I was going to have a 1" body lift installed. So when I first got the bumper, it was so close to the body, every little bump on the road would send a thud through the whole rear of my truck. Plus my front ARB bumper was so close that sometimes the body flex would scrape against the front fenders. 1" body lift has fixed that problem, no rubbing on the bumpers at all, plus it helped cleared my 285's.
 
Oh, I didn't even notice that one. He did a good job. :D

In the pictures above, it looked like your actually trim around the window may have been damaged, but looking again it looks like it may just be the rubber trim piece.
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Trending content

Back
Top