CV axle or wheel bearing?

[thegame7]

I'm guessing 90% the CV axle has gone bad? The noise is worse when I'm barely turning left and quiets down the more I steer. No hum or grinding noises when I'm driving and the noise goes away when I get on the gas. I get the noise in the video when I'm coasting.

https://www.youtube.com/watch?v=QzqKMZ_a65g

 

[MaddT4R]

Do you have any abnormal clunking or snapping noise when going between reverse and drive while holding the brake? I had bad cv’s and that noise was very apparent. You can also engage your centre diff lock and do a few tight turns and it should be clear if it’s the cv.

 

[thegame7]

Do you have any abnormal clunking or snapping noise when going between reverse and drive while holding the brake? I had bad cv’s and that noise was very apparent. You can also engage your centre diff lock and do a few tight turns and it should be clear if it’s the cv.

Turns out my wheel spacers only had 2 tight lug nuts :wow::wow: Still getting a clunk though, need to check bolt tightness today.

 

[MaddT4R]

Throw some thread locker on those.

 

[radlynx]

Wheel bearing.

 

[thegame7]

Throw some thread locker on those.

I did! Still trying to chase down the small clunking going on :noidea: