Drivers Side “A” Pillar Grip Handle Installed on 2014 -2025 T4R

Jkdog said:
Great write up/Mod and something I would like to have on my 2019. My 2004 4R had the pillar handle but not a handle above the door. However, I just have to ask, in regards to the A pillar air bag, does anyone know how the air bag deploys? The only reason I can see for Toyota not putting the handle on the pillar is due to a possible risk. Is there a chance that adding the handle will imped the airbag? I removed the cover when I installed my phone mic, and I couldn't figure out how it all worked (but I didn't really care too much at that point). I know most people don't know the answer, just thought I would put it out there.
Click to expand...

I understand there is a video on YouTube of the 4Runner air bag deployment.

The airbag on the passenger side is in the same location as the drivers side location. The handle locates in the same configuration but with a kit instead of the welded brackets from the TOYOTA factory. Do yourself a favor and pull both trim pieces off and take a look!

I stated before that I think it should have been a factory grip handle located there like the FJ Cruisers have.
 
I love this feature on my 4th gen....and since you can do this now on the 5th, there is hope for a future purchase. Woohoo! Very cool. Cheers!
 
Thanks Saker. Didn’t think about the passenger side. I want to remove the handle above the driver door and put this handle.
 
Jkdog said:
...... I want to remove the handle above the driver door and put this handle.
Click to expand...

Be sure to use the FJ Cruiser Grip Handle as described in the link above. There are different ways to secure the handle, so read the full thread.
 
Hey everyone...

I want everyone to know that I am receiving your emails and I have started an Excel sheet log to keep track of everyone.

I am working on making the brackets and for those that have already paid.. Please know that I am still working on them and will ship them soon my welder is done...
He was unable to weld them this week unfortunately.

I will respond to everyone's email by Monday and I appreciate the support and love of my idea/project...

thank you.

Thanks,
Jason
 
Jasontamu said:
hi all....thanks for all the interest and im glad everyone likes it.

like saker mentioned im out of town for work...ill return this weekend and next week ill be able to make more with my welder (i believe i only have one more in stock currently) so i can if all goes well have products shipped by Friday next week......just PM me and email is fine as well. Jasontamu2002@g mail.com

i see i have some PM's already so i appreciate that and can make some once im back home.

thanks,
-J
Click to expand...

Please add me to the list of buyers for your next batch, Jason. You've got related email/PM.

Thanks!
-Eric
 
Jasontamu said:
Hey everyone...



I want everyone to know that I am receiving your emails and I have started an Excel sheet log to keep track of everyone.



I am working on making the brackets and for those that have already paid.. Please know that I am still working on them and will ship them soon my welder is done...

He was unable to weld them this week unfortunately.



I will respond to everyone's email by Monday and I appreciate the support and love of my idea/project...



thank you.



Thanks,

Jason
Click to expand...



Thanks for the update!


Sent from my iPhone using Tapatalk
 
Jasontamu said:
Hey everyone...



I want everyone to know that I am receiving your emails and I have started an Excel sheet log to keep track of everyone.



I am working on making the brackets and for those that have already paid.. Please know that I am still working on them and will ship them soon my welder is done...

He was unable to weld them this week unfortunately.



I will respond to everyone's email by Monday and I appreciate the support and love of my idea/project...



thank you.



Thanks,

Jason
Click to expand...



PayPal sent [emoji56]
 
Jasontamu said:
Hey everyone...

I want everyone to know that I am receiving your emails and I have started an Excel sheet log to keep track of everyone.

I am working on making the brackets and for those that have already paid.. Please know that I am still working on them and will ship them soon my welder is done...
He was unable to weld them this week unfortunately.

I will respond to everyone's email by Monday and I appreciate the support and love of my idea/project...

thank you.

Thanks,
Jason
Click to expand...

I'm in too. Sending over a PM now.
 
Welder finished a batch today. I'm shipping tomorrow for those that have paid.

I have 3 unsold so far. So next three get shipping this week then i'll make more once those are sold.

Thanks.
J
 
Happy memorial day everyone. For any service men with and with out us thank you for your service.

I received a fair share of emails as many received my packages and had a good outcome installing them. Great to hear...

I spent the day with my father building a shed in the backyard.....my grandfather, his father who paid ultimate sacrifice in Vietnam is why I always spend memorial day with him.....

Glad everyone had a good weekend. I have a few left ...i can make more. Take care all...

J
 
Drivers Side “A” Pillar Grip Handle Installed on 2014 T4R

I am running one of Jason's original prototypes...



...been in there for almost 3 years!!! ZERO problems, and I love it!



:thumb:

20735260d406c485a63dca96d9ff110d.jpg
 
Last edited:
You must log in or register to reply here.

Similar threads

Lexington
Problem With Key Remote Lock & Unlock Not Working? Heres How To Fix It
Replies
0
Views
3K
Lexington
Lexington
B
Post-suspension refresh results - uneven on one side
Replies
4
Views
5K
Zhehan
Z
Fiffa
FS: 3rd Gen 4Runner Limited, Vancouver, WA, $13k OBO
Replies
2
Views
3K
Fiffa
Fiffa
G
FS 4th Gen Door Handles, $45 & Driver Side Front Fender Colorado Springs, CO
Replies
0
Views
3K
grumpy02
G
lasfit
Why is One Side of Your Light Not Working After an LED Upgrade? | Lasfit Reveals
Replies
0
Views
1K
lasfit
lasfit

Members online

No members online now.
Total: 6,148 (members: 0, guests: 6,148)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top