Dual battery kit 5th gen

Dlak

New member
I was at the offroad expo in pomona a couple of weeks ago and ran into a gentleman by the name of Jawan from Kodiak industries. He mentioned that they had just tested a dual battery kit on a trail edition t4r and have a kit available. The kit consists of (2) 1200amp odyssey marine grade batteries, tray, hold down, all the hardware and wires, and the tools to install the system. Pictures will be available in a couple of days.

KODIAK INDUSTRIES INC.
 
Register to hide this ad
the Odyssey batts are well regarded... this approach would sure save some space under the hood! looking forward to the pics of the 5G install.

man, those Kodiak folks need an editor for their website, though... or at least run a frickin' spell-check on it. :eek:
 
Last edited:
the Odyssey batts are well regarded... this approach would sure save some space under the hood! looking forward to the pics of the 5G install.

man, those Kodiak folks need an editor for their website, though... or at least run a frickin' spell-check on it. :eek:

In the existing pics they have on there, it looks like two batteries side-by-side, but is that setup gonna fit into the runner in the existing battery location? If it does, then I assume that their marine batteries are smaller? Guess I just need to wait for the pics.
 
Batts

In the existing pics they have on there, it looks like two batteries side-by-side, but is that setup gonna fit into the runner in the existing battery location? If it does, then I assume that their marine batteries are smaller? Guess I just need to wait for the pics.

Yes I remember him telling me that the batteries will be mounted side by side. I think the batteries are 6" wide 7" long.... This will leave more space open on the left side of the engine bay for a pump or washer fluid bottle relocation.
 
Yes I remember him telling me that the batteries will be mounted side by side. I think the batteries are 6" wide 7" long.... This will leave more space open on the left side of the engine bay for a pump or washer fluid bottle relocation.

I already have a little battery box over there on the left that I store my air comp hoses and attachments in...so this is a great thing for sure!
 
I was at the offroad expo in pomona a couple of weeks ago and ran into a gentleman by the name of Jawan from Kodiak industries. He mentioned that they had just tested a dual battery kit on a trail edition t4r and have a kit available. The kit consists of (2) 1200amp odyssey marine grade batteries, tray, hold down, all the hardware and wires, and the tools to install the system. Pictures will be available in a couple of days.

KODIAK INDUSTRIES INC.
Very nice setup.I don't see prices .How much did they say this was?

Maybe if they put both batteries on the passenger side .The problem with both batteries on the drivers side is these 4Runners have so much extra weight ALREADY on the drivers side with a full gas tank and driver on that side .I could actually feel it on off camber trails that were tilting to the left.Compensated somewhat with a few more turns on my drivers side CO's but I need to get more weight on the other side.Either that or trade 100lb GF in for one of those voluptuous zaftig women and hang her out the right window for ballast.

These odyssey 1200 batteries are really nice and small but still weigh 38 lbs a piece. Not sure if they're worth the price tag of $220-240 a piece either for what I do.I can get a Diehard or Optima for half that price and mount it on the other side and use a Sure Power battery separator.
 
cost

Very nice setup.I don't see prices .How much did they say this was?

Maybe if they put both batteries on the passenger side .The problem with both batteries on the drivers side is these 4Runners have so much extra weight ALREADY on the drivers side with a full gas tank and driver on that side .I could actually feel it on off camber trails that were tilting to the left.Compensated somewhat with a few more turns on my drivers side CO's but I need to get more weight on the other side.Either that or trade 100lb GF in for one of those voluptuous zaftig women and hang her out the right window for ballast.

These odyssey 1200 batteries are really nice and small but still weigh 38 lbs a piece. Not sure if they're worth the price tag of $220-240 a piece either for what I do.I can get a Diehard or Optima for half that price and mount it on the other side and use a Sure Power battery separator.

He said it goes for $835.00. The batteries are pretty pricey but deliver 2400 total amps. I am considering it since I do have a winch and lights, also planning on an arb fridge and like the ability to manually switch over to the aux batt when the car is off to keep the fridge running. Plus I am going to need the space on the passengers side for the washer fluis bottle relocation.
 
Dlak, was that price with the batteries? I'm also considering a setup due to the fact we are also going to get an ARB fridge and some other accessories.
 
Dlak, was that price with the batteries? I'm also considering a setup due to the fact we are also going to get an ARB fridge and some other accessories.


Yes that includes 2 pc1200 batteries, hardware, battery tie downs, and install kit including tools to install. I have a winch and lights and am planning on getting an arb aswell. The thing I like about this setup other than 2400 amps is that you can flip the switch over to aux when your at a camp site and have your fridge just run off of that one batt till drained. You can then flip to main to start the vehicle and once the vehicle starts it will go into dual mode and charge the empty battery.
 
This sounds really strange but it looks like the UPS driver is holding my kit hostage or something. He attempted delivery on Thursday during which I had an argument with him over the phone since I wasn't there to except it.(The intercom goes to my cell phone.) Friday, no delivery attempt, Monday, no delivery attempt. I called the depot this morning and they said the driver wasn't answering his pages. I called again this evening and they still didn't have an answer.

It's bizarre but maybe I'll find out what's going on tomorrow. It's killing me waiting for my new toy.
 
This sounds really strange but it looks like the UPS driver is holding my kit hostage or something. He attempted delivery on Thursday during which I had an argument with him over the phone since I wasn't there to except it.(The intercom goes to my cell phone.) Friday, no delivery attempt, Monday, no delivery attempt. I called the depot this morning and they said the driver wasn't answering his pages. I called again this evening and they still didn't have an answer.

It's bizarre but maybe I'll find out what's going on tomorrow. It's killing me waiting for my new toy.



That's sux man, im looking forward to see this setup on a 5gen. let me know if you want to hunt the driver :hunter:
 
I think I wanna see it about as bad as you do, and i'm 6000 miles away across the ocean!

I really wanna see your instal pics that way I can decide if it's something I really want for my runner or not.
 
After 4 phone calls to UPS my packages showed up this morning. It came in three boxes, one for each battery at 49lbs a piece, and a 3rd box full of the cables, the battery tray, and brackets which was 15lbs.

Here are the batteries. They only thing of note is the terminals are reversed on one of them to accommodate a cleaner install I suppose.
BA230068.jpg~original


Here are the various cables and parts. All the connectors look very solid with heavy rubber caps to cover them. The wires are also heavier gauge than stock.
BA230072.jpg~original

BA230074.jpg~original

BA230073.jpg~original


Here is a picture of one of the aluminum brackets that holds down the batteries. Looks very well built to me, very clean machining, anodized, and inlaid with the logo. Everything was very well wrapped. That foam package the bracket is sitting on is the battery tray.
BA230070.jpg~original


Finally it looks like they threw in a little knife, looks like a Syderco knock-off. Never hurts to have another knife laying around.
BA230071.jpg~original


There is another little package which has the instructions. I'm going to knock off work early today and install this. I'll try to post up some pictures tonight if I get around to it.
 
nice

After 4 phone calls to UPS my packages showed up this morning. It came in three boxes, one for each battery at 49lbs a piece, and a 3rd box full of the cables, the battery tray, and brackets which was 15lbs.

Here are the batteries. They only thing of note is the terminals are reversed on one of them to accommodate a cleaner install I suppose.
BA230068.jpg~original


Here are the various cables and parts. All the connectors look very solid with heavy rubber caps to cover them. The wires are also heavier gauge than stock.
BA230072.jpg~original

BA230074.jpg~original

BA230073.jpg~original


Here is a picture of one of the aluminum brackets that holds down the batteries. Looks very well built to me, very clean machining, anodized, and inlaid with the logo. Everything was very well wrapped. That foam package the bracket is sitting on is the battery tray.
BA230070.jpg~original


Finally it looks like they threw in a little knife, looks like a Syderco knock-off. Never hurts to have another knife laying around.
BA230071.jpg~original


There is another little package which has the instructions. I'm going to knock off work early today and install this. I'll try to post up some pictures tonight if I get around to it.

Very nice!
 
Groupbuy

If anyone in So Cal is interested in a group buy PM me. I spoke to Jawan from Kodiak a while back and he said he was willing to do a special price for a group buy and if we can also just have everything delivered to one location on a pallet it would save a bit more money aswell.
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Trending content

Back
Top