• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

Ecotechne roof rack GROUP BUY!!!

Status
Not open for further replies.
5thGen4Runner2015 said:
Just received another email saying they will ship it out this Thursday and I will receive it by the 28th.


Sent from my iPhone using Tapatalk
Click to expand...



Any indication that they are shipping everyone a new bottom mount. Just received my today and it is wrong too so seems likely that everyone is going to need a new one.
 
I was just contacted an the ladders did come with the wrong bend. They'll be mailing all those pieces to everyone.
 
Rorck, I ordered/paid an extra tray and bar. It was supposed to be in batch 9. If there are others that need either, feel free to refund me and ship to them to speed up their lag time. I don't think I'll need either.

Sent from my SM-G935T using Tapatalk
 
KCT4R said:
i received my tracking number last Wednesday, batch 10. I've checked about every day and no luck. I even tried to see if it was a DHL number. i emailed ecotechne this morning and they says its a Fedex updating issue. curious to see if anyone is having same concern or is there a different way to look up tracking. I'm thinking they have printed label but haven't shipped out to receive first scan. its not life or death. I'm just starting to be impatient with having a tracking number.

also with all of these racks being shipped out, we need to start seeing a lot more installed photos from everyone. curious to see everyone's setup. looking to install a single row led light bar and or other ideas from everyone.
Click to expand...

Same boat here. Received an email last week with a FedEx # that still doesn't have any information available. I've been checking with both FedEx International and domestic and nada.
 
derryck said:
Same boat here. Received an email last week with a FedEx # that still doesn't have any information available. I've been checking with both FedEx International and domestic and nada.
Click to expand...

Since they are coming FedEx it does take a bit longer. They aren't as fast as DHL and unfortunately DHL has put a weight and size limit on what they will ship. This is one of the reasons we've been waiting on another GB. Since FedEx is slower we want to have all the stuff ready so when people put in the order they will ship and get the stuff with a good ETA.
 
LV4RNRTRAIL said:
Rorck ,My bottom and top ladder attachment pieces are also with the wrong bend. Thanks for informing us that the new pieces will be mailed to all of us. The ladder itself looks amazing! The ladder cuts, curves, and finish are top notch, and flawless. I'm very happy to get this ladder. THANKS Rorck! And thanks to all of you at ECOTECHNE for following through to keep things right on the business side. That say's a lot about your Company.
Click to expand...

Hi LV4RNRTRAIL, are you sure the top bracket is incorrect? The bottom for sure is, but the top was correct on mine. See pic with it bolted up.
l-force-albums-ladder-picture47524-20170821-110127.jpg


Also those with installation questions, it was best to find where you think it will go, install the top and lower brackets on the door, then bolt the ladder to the brackets. Before final torques on the ladder hardware, you loosen the top and lower brackets from the door and slide them whatever way you need them to go, then final torque all hardware. FYI, after I loosely installed the top ladder bolts to the mount, there was like an inch gap from the ladder and the lower mount. Simply flex the ladder buy pulling it down, a pretty hard tug, and it will pull to a resting point on top of the lower mount.
 
got mine a few hours ago, bottom bracket is incorrect as everyone stated.

think my ladder bent a bit by the top, during transit, cracked powder coat where this supposed bend happened.
 
L-Force said:
Hi LV4RNRTRAIL, are you sure the top bracket is incorrect? The bottom for sure is, but the top was correct on mine. See pic with it bolted up.
l-force-albums-ladder-picture47524-20170821-110127.jpg


Also those with installation questions, it was best to find where you think it will go, install the top and lower brackets on the door, then bolt the ladder to the brackets. Before final torques on the ladder hardware, you loosen the top and lower brackets from the door and slide them whatever way you need them to go, then final torque all hardware. FYI, after I loosely installed the top ladder bolts to the mount, there was like an inch gap from the ladder and the lower mount. Simply flex the ladder buy pulling it down, a pretty hard tug, and it will pull to a resting point on top of the lower mount.
Click to expand...

Thanks for posting that photo. My top ladder bracket is just like yours. My bottom bracket is just like yours was before you used your skills to flip that bracket angle. I'm impressed ! Great install, all the install angles look nice and straight/level with the vehicle lines. Looks like a new bottom bracket will do it for me. I have no welding skills. Thanks again.
 
LV4RNRTRAIL said:
Is this correct? The top ladder bracket is correct, and the bottom brackets are bent wrong (except for L-Forces bottom bracket due to his talented abilities)
Click to expand...

The bracket on the lower left has the flange cut and bend flipped from what is needed, everything else looks good. Do you have the two slim strips of steel like in my pic? You need them for the 3 caps screws on the mount to push against for install so they don't push directly into the doors skin. For the record, I didn't weld it up myself, I took it to a locale shop here so I knew it would be strong. Cost me $30, but worth the piece of mind.
 
Last edited:
Jefe said:
Anyone else getting the wrong roof rack? Ordered one for a 4th gen and got what appears to be a 5th gen
Click to expand...
yep same thing happened to me. ordered the 3rd gen rack and received the 5th gen rack. fortunately someone else wanted the 5th gen rack that was local. but i am still waiting on the 3rd gen rack
 
Has anyone received shipping notification for the ladder replacement piece? They where supposed to finish bending them yesterday.
 
Status
Not open for further replies.

Similar threads

TN4Runnin
4th Gen Prinsu Roof Rack - Middle Tennessee
Replies
1
Views
1K
rooneyy
rooneyy
MillerPKA
  • Locked
GOBI Racks - Limited Edition Open Air Roof Racks - T4R Exclusive Group buy
Replies
8
Views
11K
fourwd1
fourwd1
elusive01
[5th Gen] Ecotechne Roof Rack (Bay Area - $800)
Replies
0
Views
606
elusive01
elusive01
B
**Bajarack Group Buy**
2
Replies
24
Views
5K
YetiX
YetiX
nick_rabbo
Installed Victory 4X4 Roof Rack - Full Length Aluminum
2
Replies
34
Views
30K
nghiS4
nghiS4

Members online

Total: 2,802 (members: 1, guests: 2,801)

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top