Front is 23" center hub to fender..what kind of lift is this?

[rc10mike]

Sorry if this is common knowledge but when I bought my 17 ORP w/KDSS it was already lifted. Im trying to figure out how much my FRONT is actually lifted vs stock.

The rear has Dobinsons C59-725 KDSS springs and 5100's. Front is 6112 with Eibach 700lb springs.

My 4R has the factory rake look if that matters.

 

[Grape Ape]

Subtract the stock height from your current height and that will give you the answer.

 

[4CrawlerORP]

3-3.5”

 

[rc10mike]

Subtract the stock height from your current height and that will give you the answer.

Did you even read my post?

 

[rc10mike]

3-3.5”

So stock is around 20"?

 

[meltdown]

Front is 23" center hub to fender..what kind of lift is this?

So stock is around 20"?

Yes. Each vehicle varies a little, but 20” is a good average for the front. Stock rear is generally around 22”.

 

[TRD PANTHER]

So stock is around 20"?

Yes. For the OR & ORP’s. The Pros are 1” higher up front as compared. I added 1.5” front and 1” rear Cornfed spacers to my Pro and my front center hub to top of fender measures 22.5”. My rear is 23.25”. Hope that helps.