FS: 3rd Gen Wood Grain Interior Pieces, Gas Lid, E-locker axle- Kansas City

[ToyotaBrah]

Sold

 

[blarblarjosh]

Hey, I'll take the fog light stalk, fog lights, and clock.

 

[ToyotaBrah]

Fog lights, headlight stalk and clock sold.

 

[sauer]

If all the wood trim is available I can take it

 

[19963.4lsr5]

FS: 3rd Gen Parts (Interior: wood, handles, switches, desert dune gas lid)Kansas City

I could use a overhead sunroof single switch pigtail from a 99 on up. I need the blue connector and a foot of wire to convert my 97 to the new style controls. I already have the overhead console and a mirror for the newer style. I just need the wiring harness part of it.


Sent from my iPhone using Tapatalk

 

[ToyotaBrah]

If all the wood trim is available I can take it

Send me a PM. Thanks

I could use a overhead sunroof single switch pigtail from a 99 on up. I need the blue connector and a foot of wire to convert my 97 to the new style controls. I already have the overhead console and a mirror for the newer style. I just need the wiring harness part of it.


Sent from my iPhone using Tapatalk

I should be able to get this for you. Won't charge you much.

 

[RandyBobandy]

Would you just sell the master switch and other window switches? Do you know if they will fit a 97?

 

[ToyotaBrah]

Would you just sell the master switch and other window switches? Do you know if they will fit a 97?

Good question, I'm not entirely sure. I'd have to reference back to the part numbers. These came off a '99.

I have no problem selling just the window switches.

 

[RandyBobandy]

I just checked and it looks like they won’t work, thanks anyways

 

[bowrappyo]

Sun roof motor?

Happen to have a sunroof motor from your part out?

 

[ToyotaBrah]

Happen to have a sunroof motor from your part out?

Someone else snagged it! Will let you know if I come across another.

 

[bowrappyo]

Someone else snagged it! Will let you know if I come across another.

Just picked one up thanks!

 

[ToyotaBrah]

Woodgrain pieces available as well as gas cap.

Also, have a variety of oak trim odds and ends. Send me a message with any requests.

 

[MasterMatty]

any chance you have an oak glove box in good shape?

Also need hardware/clips for driver's side door card and trans tunnel

Also need interior trip for B pillar below seat belt?

Rear cup holder in working condition?

 

[ToyotaBrah]

any chance you have an oak glove box in good shape?

Also need hardware/clips for driver's side door card and trans tunnel

Also need interior trip for B pillar below seat belt?

Rear cup holder in working condition?

I have yet to come across a good glovebox from any parted out truck, sorry!
No cupholders currently, and I don't have the B pillar piece. Let me dig around and see if I have the hardware for the driver's door panel.

 

[ToyotaBrah]

Woodgrain trim and gas lid available. Willing to part out the woodgrain set.

 

[RomanSchnobrich]

You wouldn't happen to have any desert dune headlight filler panels would you?

 

[ToyotaBrah]

You wouldn't happen to have any desert dune headlight filler panels would you?

I don't, sorry!

Have had a few PMs regarding pics of the rear locker housing. I will get pics by tomorrow, and apologize for not having them up. It has been quite a hectic week and weekend.

 

[RomanSchnobrich]

No worries! Heck, add me to the list of those curious about the elocker. Is it just the housing?

 

[ToyotaBrah]

Replied to all PMs.

No worries! Heck, add me to the list of those curious about the elocker. Is it just the housing?

Correct, just the housing. Pics of it added to the photo link that can be found in the original post and here:
3rd Gen, 4th gen 4Runner Parts - Google Photos



I have experience shipping locker housings. Recently shipped one to Denver.

Used a double corrugated custom made box rated for the weight of the housing (roughly 65 lbs). Shipping and materials came out to $130, using the cheapest shipping option, which was FedEX Ground. Expect to pay around this much +- $20.