crazydubman
New member
THESE HAVE BEEN SOLD
Hey there everyone,
The time has come to part with my Total Chaos lift spindles. These are for factory uniball lowers not the TC uniball. They can be made to work with long travel with a little modification. (basically cut off and reweld the lower flange for the lower mount.)
They have been on the runner for a few years but never gave any problems and I have never had any issues with them.
Install is easy and straight forward and all hardware comes with them. Only alteration is the tie rods have to be spun out about 3/4 of an inch.
Here is a link to information about them.
Off Road Warehouse
Looking to get $950 + ship for them as there is nothing wrong with them and there are no moving parts to wear out. These things are in the same condition as when I bought them new. The powdercoating is in great shape and there are no threads except the caliper bolts worry about for mounting. Everything is bolt through. I will include the wrench that I had to modify to get the nut tightened on the UCA bolt.
Sorry 4wd guys but these are 2wd only.
NOTE:
These will not work with the stock 4runner upper control arms. The stud is too short on the factory ball joints. Must use aftermarket upper control arms.
Should work with Tacoma UCA's though as the stud is longer on the ball joint.
I can ship these where ever but keep in mind that they are about 25lbs a piece. So shipping wont be $10 dollars.
I am located in the bay area in northern California for local pickup if needed.
Thanks for looking.
Hey there everyone,
The time has come to part with my Total Chaos lift spindles. These are for factory uniball lowers not the TC uniball. They can be made to work with long travel with a little modification. (basically cut off and reweld the lower flange for the lower mount.)
They have been on the runner for a few years but never gave any problems and I have never had any issues with them.
Install is easy and straight forward and all hardware comes with them. Only alteration is the tie rods have to be spun out about 3/4 of an inch.
Here is a link to information about them.
Off Road Warehouse
Looking to get $950 + ship for them as there is nothing wrong with them and there are no moving parts to wear out. These things are in the same condition as when I bought them new. The powdercoating is in great shape and there are no threads except the caliper bolts worry about for mounting. Everything is bolt through. I will include the wrench that I had to modify to get the nut tightened on the UCA bolt.
Sorry 4wd guys but these are 2wd only.
NOTE:
These will not work with the stock 4runner upper control arms. The stud is too short on the factory ball joints. Must use aftermarket upper control arms.
Should work with Tacoma UCA's though as the stud is longer on the ball joint.
I can ship these where ever but keep in mind that they are about 25lbs a piece. So shipping wont be $10 dollars.
I am located in the bay area in northern California for local pickup if needed.
Thanks for looking.
Last edited:
