• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

FS: Bilstein/OME Suspension in Gaithersburg, MD

Register to hide this ad
What is the max lift you can achieve with this setup in the front? I have LC 7's for my rear so I will be around 3-3.5"
 
tekno said:
what is the max lift you can achieve with this setup in the front? I have lc 7's for my rear so i will be around 3-3.5"
Click to expand...


2.5" is the listed max for the 5100 with stock springs. The 883s should bump that up a bit.
 
Last edited:
Sale pending ....


...but from Wheelers Offroad:


"Some customers are asking for these newer coils for heavier applications similar to the ones listed for the 2882 coils.
These are made from 16.5mm wire, have a free height of 375mm (same free height as 2881), and have a 590lb rate."
 
ADDITION: I'll be driving to VA Beach on 14 December if someone between the DC area and VA Beach wants to meet. Not sure what time I'm leaving the DC area yet...
 
Interested and in the Rockville area. Just need to do some research on 4th gen fitment and what rear spring I would need.
 
I know you said you wouldn't ship, but this is the exact setup I'm looking to do on my trail 4runner (~1" in the front to level it out and keep factory rear coils with new shocks).

Can you give me some more info on how the fronts are setup? I'm assuming OME 833 coils installed on the 5100s at lowest position? Do you have a picture of your rig with these installed?

Don't want to derail your thread, but I'm curious on this setup because it'd be cheaper than adjustable coilovers, as they'd be cranked down to ~1".

Thanks,
 
You must log in or register to reply here.

Members online

No members online now.
Total: 3,562 (members: 0, guests: 3,562)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top