SCRunner12
New member
I have a few suspesion parts that I'm trying to get let go since I don't have a use for them anymore. All parts are located in Santa Cruz, CA and are in working condition.
3/4" Lift Top Plate Spacers, used, but in great shape. $50 shipped
14x3x600 Coilover Springs. So, 600lb springs to use on 2.5" coilovers, they will not work with 2.0 coilovers. Also, these are only for aftermarket coilovers like Icon, Fox, King, ect. They will not work with your 5100's. Just wanted to make that clear, since people always ask. $75 plus shipping
Donahoe/Icon 2.5" Coilovers. They have unknown miles, but will require a rebuild. They aren't currently leaking, but will need all new bushings, oil, seals, one shaft and recharged. I have the seals, bushing and lower rod end bearings new and will be included in the sale. One shaft has a small scuff on it and "should" be replaced. Some people have smoothed them out and been fine, but that is up to you. One mounting hole is stripped, but it is a mounting point for Tundras/Sequoia's so it doesn't matter to us. You will need, oil, a replacement shock shaft ($55) and a mean to recharge them to complete the rebuild. It does include a spanner wrench. $500 plus shipping I currently have a pending sale, but wanted to get interest in case the buyer flakes. SOLD!!!
Stripped, non-necessary mounting hole.
2 Spidertrax 1.25" wheel Adapters. They are in good shape, just a little dirty and ready to bolt on. $75 plus shipping SOLD!!!
Set of 24 OEM Washer Type Lug Nuts. All in good shape. $20 plus shipping
3/4" Lift Top Plate Spacers, used, but in great shape. $50 shipped
14x3x600 Coilover Springs. So, 600lb springs to use on 2.5" coilovers, they will not work with 2.0 coilovers. Also, these are only for aftermarket coilovers like Icon, Fox, King, ect. They will not work with your 5100's. Just wanted to make that clear, since people always ask. $75 plus shipping
Donahoe/Icon 2.5" Coilovers. They have unknown miles, but will require a rebuild. They aren't currently leaking, but will need all new bushings, oil, seals, one shaft and recharged. I have the seals, bushing and lower rod end bearings new and will be included in the sale. One shaft has a small scuff on it and "should" be replaced. Some people have smoothed them out and been fine, but that is up to you. One mounting hole is stripped, but it is a mounting point for Tundras/Sequoia's so it doesn't matter to us. You will need, oil, a replacement shock shaft ($55) and a mean to recharge them to complete the rebuild. It does include a spanner wrench. $500 plus shipping I currently have a pending sale, but wanted to get interest in case the buyer flakes. SOLD!!!
Stripped, non-necessary mounting hole.
2 Spidertrax 1.25" wheel Adapters. They are in good shape, just a little dirty and ready to bolt on. $75 plus shipping SOLD!!!
Set of 24 OEM Washer Type Lug Nuts. All in good shape. $20 plus shipping
Last edited:
