FS: Skid plates 3 of them, complete set.

[spitvenom]

Hi,

In the quest of turning my 4runner into an offroad beast I bought the 3 plates from SkidRow plates, they include all 3 that they sell
front ,radiator/oil pan front diff
mid , trans, mid cross bar
rear, transfer case etc


I bought these plates and never got around to install them until now and after considering that I go offroading maybe 1 time in 6 months and its very very light compared to most guys I decided there is absolutly no need for me to have all this

they are really thick and heavy duty, they fit like a glove too.

New I believe they are around 850+ shipping right now

Id like to get around 650 range for all 3.Plus shipping or picked up, which can go greyhound if youd like and it would be really cheap, otherwise I wouldnt mind keeping them but they are just overkill for a vehicle that really doesnt get used in rocks much.

Here are some pics from the site, mine are the same ones and are new.

:guitar3:

 

[20034RunnerV84x2]

I'd keep them... I was on the interstate and some piece of metal flew off of a Ford (****ty) ranger and slammed into my factory skid plates and put a sizeable dent in it. Never know what will happen and I'd rather be safe than sorry.

Just my .02

 

[spitvenom]

pmed




lol about the ranger story hahahhahhaha yes these are soo beefy and badass but I just feel like a fake brah with a truck thats lifted, huge tires, full skid plates, sliders blah blah and I do 98% cement driving and the trails I hit you can probably do with a 2wd 4runner lol

 

[SilverBullet01]

What gen is this for? looking for a 3rd gen set. Shipping to 95630?

 

[20034RunnerV84x2]

pmed




lol about the ranger story hahahhahhaha yes these are soo beefy and badass but I just feel like a fake brah with a truck thats lifted, huge tires, full skid plates, sliders blah blah and I do 98% cement driving and the trails I hit you can probably do with a 2wd 4runner lol

Hey, who says you can't have a built mall Crawler?! I go off-road but not much, I may be a 2wd but I can still go!

 

[spitvenom]

Guys these are for 3rd gen 4runners 96-02 and 96-04 tacomas. Thank you, Pm me for shipping since I dont check this often.

 

[crazydubman]

Great price on a basically new set.

I'll keep an eye on this in case I come up with some extra funds soon.

One question... Will these work with a diff drop?

 

[Mahalas]

pmed

 

[spitvenom]

Yes they will work with a diff drop you just use the little spacers included and thats all.

 

[crazydubman]

awesome. Let me see how things pan out with selling my 88 pickup. if enough funds are left over i might have to pick the set up from you.

 

[spitvenom]

and you are in socal so maybe no shipping involved. I had buyer but by the looks of it sell is going to fall, there another guy that was really interested in them, I will call him and see where we stand. but for now these are still for sale.

 

[crazydubman]

Actually im up in northern California. If i did pick them up it may be where we could meet at the yearly pismo jamboree next month to save any shipping costs. Again if they sell no worries but if they are still around and I have the funds I hope to pick them up.

 

[ChildrenOfBodom]

Hey man,

I'm down in Socal. I've got a skid row front plate and I wouldn't mind the full set. I don't quite have 650 to throw around at the moment, but if you don't sell by the time I've got the funds, I'll hit you up.

good luck!

 

[redbull9944]

Hey man,

I'm down in Socal. I've got a skid row front plate and I wouldn't mind the full set. I don't quite have 650 to throw around at the moment, but if you don't sell by the time I've got the funds, I'll hit you up.

good luck!

If COB wants the other plates I'll take the front plate.

 

[ChildrenOfBodom]

If COB wants the other plates I'll take the front plate.

That would work out great.

 

[redbull9944]

PM sent...

 

[spitvenom]

Ok guys thanks for the pm I havent really kept up with selling these, they are on my truck right now but they are still for sale.

thats fine if you guys want to split them up, do u guys want to figure out how much each would pay and get back to me if you can agree on something? also redbull where are you located?

 

[redbull9944]

Ok guys thanks for the pm I havent really kept up with selling these, they are on my truck right now but they are still for sale.

thats fine if you guys want to split them up, do u guys want to figure out how much each would pay and get back to me if you can agree on something? also redbull where are you located?

I'm near Pittsburgh. I'll pay for shipping. Should be 25-50 bucks, not sure how much the thing weighs. I'll contact COB and see what we want to do.

 

[spitvenom]

I'm near Pittsburgh. I'll pay for shipping. Should be 25-50 bucks, not sure how much the thing weighs. I'll contact COB and see what we want to do.

deff not 25 lol. This front plate is super thick and strong id say atleast 40-60 lbs.