Fumoto Drain Valve Mod

theoutbackdream said:
Should I from the factory? I have the one that goes under the engine..

I don't have one that covers the hole to access the drain plug though...
Click to expand...
Ohhhhhh, I thought you meant you didn't have the factory skid plate. No, the Fumoto does not stick out past the factory skid plate. I suppose a rock or something could get up in there and break it, but I'd think it would be pretty unlikely. I've never even thought about it until you mentioned it.
 
theoutbackdream said:
Should I from the factory? I have the one that goes under the engine..

I don't have one that covers the hole to access the drain plug though...
Click to expand...

It was just a rubber plug in the skid plate that covers that access hole. The valve does not stick out past it. I can say with having it on for almost a year now and going through some gnarly offroading I am impressed with how it has performed and hasn't budged or dripped any oil. Also note i did get the extra lever lock piece that prevents it from moving at all, unless you remove the block off the lever(if that makes sense)
https://www.fumotooildrainvalve.com/fumoto-lever-locking-clip-for-all-f-series-fumoto-valves.html
 
S p a r k y said:
In about 900 miles I get to try my Fumoto out for the first time. Was anyone else a little excited to try the first time?
Click to expand...

Wondering what you thought, I was like you excited, one thing I did realize is absolutely no clean up which is great, but man did it take forever to fully drain out.
 
wadle5 said:
Wondering what you thought, I was like you excited, one thing I did realize is absolutely no clean up which is great, but man did it take forever to fully drain out.
Click to expand...

I had read it takes awhile, but I did not expect it to take that long. I did it cold as well. I think I am going to try it warm this time and run a timer on it. I did enjoy it, and glad I bought one!
 
YetiX said:
Ohhhhhh, I thought you meant you didn't have the factory skid plate. No, the Fumoto does not stick out past the factory skid plate. I suppose a rock or something could get up in there and break it, but I'd think it would be pretty unlikely. I've never even thought about it until you mentioned it.
Click to expand...

That's a skid plate? I thought that was a crossmember. Learned a new thing today. haha

Good to know that it doesn't stick past the skid :)
 
wadle5 said:
It was just a rubber plug in the skid plate that covers that access hole. The valve does not stick out past it. I can say with having it on for almost a year now and going through some gnarly offroading I am impressed with how it has performed and hasn't budged or dripped any oil. Also note i did get the extra lever lock piece that prevents it from moving at all, unless you remove the block off the lever(if that makes sense)
https://www.fumotooildrainvalve.com/fumoto-lever-locking-clip-for-all-f-series-fumoto-valves.html
Click to expand...

What rubber plug do you have? Sounds interesting.

Glad to know that you've done some crazy offroading without issues. I'll probably end up buyign the lever lock piece as well for the piece of mind :)
 
theoutbackdream said:
What rubber plug do you have? Sounds interesting.

Glad to know that you've done some crazy offroading without issues. I'll probably end up buyign the lever lock piece as well for the piece of mind :)
Click to expand...
Oh the plug I have only ever seen on one other 4runner the reality is it falls out. I will see if I can find a part number but just useless part that 99.9% or 4runners have lost and do without.

Sent from my SM-G935V using Tapatalk
 
theoutbackdream said:
What rubber plug do you have? Sounds interesting.

Glad to know that you've done some crazy offroading without issues. I'll probably end up buyign the lever lock piece as well for the piece of mind :)
Click to expand...
Definitely buy the lever lock. Not that I think you'd ever need it, I haven't, but it's great for piece of mind.
 
I have a Fumoto valve on my 4Runner and just put one on my Crosstrek. Both have the lever-lock just for the extra added assurance, but I think that I'd have to be into some serious stuff to accidentally open the valve in either vehicle, but aluminum skids under the Crosstrek should make me feel better. By the way, the Crosstrek uses 0W-20 which comes out like pressurized ice-tea!! A Fumoto valve or similar is required on that vehicle in order to avoid "Exxon Valdez-ing" your garage!
 
wadle5 said:
Oh the plug I have only ever seen on one other 4runner the reality is it falls out. I will see if I can find a part number but just useless part that 99.9% or 4runners have lost and do without.

Sent from my SM-G935V using Tapatalk
Click to expand...

Ah.. Thought it would stick in there better. It's fine though! Thanks for that info!
 
I bought the Fumoto F103N and the threads don't seem to be the same on my oil pan. 2005 4runner v8

This shouldn't be this difficult...Any ideas?
 
Has anybody tried the F103SX? I've got the F103N, and I like it, but like idea of a lower profile.
 
simple said:
Has anybody tried the F103SX? I've got the F103N, and I like it, but like idea of a lower profile.
Click to expand...
I just got the 106SX (M14-1.5) for a different (not a 4Runner) car. I assume it is the same size as the 103SX (M12-1.25) for the 4Runner - just with 14mm diameter and 1.5 threading. It is configured as two pieces so that it can fit on an oil plan with a recessed oil drain plug. I don't have them side by side to compare, but since the 4Runner drain plug is not recessed, I think the "SX" version will end up sticking out the same, just angled to one side.
 
You must log in or register to reply here.

Members online

Total: 317 (members: 1, guests: 316)

Forum statistics

Threads
278,310
Messages
3,554,080
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top