SupraRacer
New member
Its not too bad, but at 60mph the wheel will just shake back and forth maybe a centimeter or so. this started after i went playing in the snow. i went out and we were going from one field to the next, and there was a little water runoff rut. and figure about 4" of snow on the ground and well the rut filled up with ~8-10, so it looked not too deep, and one of the other guys tried taking it slow and got stuck, The radius of the runoff is about the radius of my 31"s. so i gave it a little run (maybe 5-8mph) and i hit it at about a 30* angle, well the truck bucked back and forth as i went through it with enough force to throw me around a bit, and bounce the truck into the air. (Went through it fine btw) but after that the wheel shakes a bit and of course there is a vibration but ive allways had it(i need my tires balanced).
Now i am very mechanically inclined. rebuilding engines, transmissions, you name it i can do it. but this is my first truck/suv. and the suspention is setup completly differant than what im used to working with. so what would you suggest i look for first? Its a first that i dont know where to start, so i figured id ask the pros.. thanks in advance.
Now i am very mechanically inclined. rebuilding engines, transmissions, you name it i can do it. but this is my first truck/suv. and the suspention is setup completly differant than what im used to working with. so what would you suggest i look for first? Its a first that i dont know where to start, so i figured id ask the pros.. thanks in advance.