GreenbowCounty's build up!

Camper

[MENTION=56021]Nelsonmd[/MENTION] I need to get a pic of it out. Picking truck up tomorrow and will put on spare and tire cover. Hope to have something up showing the awning, got a better one in the garage but one of the local guys has urged me to sell to him only if I decide to part with it.
[MENTION=93037]DizzyDoyle[/MENTION] John, how are you man?! what do you have planned next?
 
Last edited:
[MENTION=84917]GreenbowCounty[/MENTION], things are going man. Working a lot and not having much time for the 4runner. Hoping to get on an awning set up too in the next month or so. Would be nice for tailgating at some of these UGA home games. Y'all have any rides planned anytime soon?
 
Truck looks great, love seeing the rear spare carrier back in action! Which grommets did you lose? I was able to order a new rubber dampner that goes over the latch from a Toyota dealer in the UK, I'm sure other bits would be available there as well.
 
[MENTION=84917]GreenbowCounty[/MENTION], things are going man. Working a lot and not having much time for the 4runner. Hoping to get on an awning set up too in the next month or so. Would be nice for tailgating at some of these UGA home games. Y'all have any rides planned anytime soon?

One of the guys on the page is planning something big which should be posted soon. Other than that I know we talked about a ride late next month or November.
[MENTION=62240]IanB[/MENTION] I misplaced the two rubber covers. If you come across please let me know.
 

Attachments

  • IMG_128683553966141.jpg
    IMG_128683553966141.jpg
    135.1 KB · Views: 705
  • IMG_128687926677323.jpg
    IMG_128687926677323.jpg
    137.9 KB · Views: 703
  • IMG_128674306743239.jpg
    IMG_128674306743239.jpg
    141.8 KB · Views: 684
  • 2014-09-07 20.14.02.jpg
    2014-09-07 20.14.02.jpg
    130.1 KB · Views: 696
Upper cover: 51937-35040
Lower cover: 51938-35050

I've ordered some Euro spec OEM Toyota parts from here in the past:

Toyota and Lexus Genuine Parts Specialists

I actually bought both those covers new as the locking tabs were broken when they were removed, prior to shipping is my guess, they were broken when I got the truck anyways.
 
Preciate it Spencer! Next is open maintenance then bumpers and sliders but keep going back and forth on bumpers

I hear ya man. There's a guy selling some 4xinnovations sliders in Craigslist for like 200. Pretty good deal. Have you priced bumpers from the place that did the tire carrier?
 
Preciate it

I hear ya man. There's a guy selling some 4xinnovations sliders in Craigslist for like 200. Pretty good deal. Have you priced bumpers from the place that did the tire carrier?

[MENTION=73561]spenedwrds[/MENTION] Yeh, I texted him about the sliders a while back but glad you reminded me. I'll try and reach out to him again. Not sure that ACC does bumpers but not a bad question to ask. At this point I'm thinking Addicted Offroad for the rear and $x or ARB for the front. :shrug:

What do you think?
 
[MENTION=73561]spenedwrds[/MENTION] Yeh, I texted him about the sliders a while back but glad you reminded me. I'll try and reach out to him again. Not sure that ACC does bumpers but not a bad question to ask. At this point I'm thinking Addicted Offroad for the rear and $x or ARB for the front. :shrug:

What do you think?

I say 4x on the front. Love the lines of their bumper more than the arb
 
Minor stuff

Been a while since an update but not much since last time other than planning. Truck has been parked since the birth of my little girl. Afraid all my attention and money for that matter have been going to her well being. I have managed to horde a few things here and there though. Purchased a set of used Tundra wheels local and also got my hands on my JAOS ladder from my 98 that I sold several years ago. Also purchased front and rear bumper plans from [MENTION=12884]Bandit[/MENTION]Runner and having those fabbed up. Plan is to have everything on before May. Will be selling my Kumhos and wheels and going with KM2s or Wrangler MTRs.

Noticed some coolant leaking after cranking this morning, only a few drips from the B&M tranny cooler hose so I'll be cleaning that up.

Upcoming:
Clean and dip ladder
Paint driver side led mirror cover
Finish wiring e-locker
Weld panhard drop bracket
Mount H4s somehow:juggle:
 

Attachments

  • image.jpg
    image.jpg
    137.4 KB · Views: 771
Preciate it

Somehow I totally missed that you have an e-locker...
Good to see the runner is getting some attention with the little one running around I get the lack of time! Also can't wait to see those Tundra rims!

[MENTION=108410]RockenAlex[/MENTION] thanks man, preciate you selling me those wheels at a great price. [MENTION=73561]spenedwrds[/MENTION] had a setup I liked: Tundra wheels and Nitto Trails so that's the look I'm going for. [MENTION=93037]DizzyDoyle[/MENTION] has them now I believe. I'll be going with the Wrangler MT/R probably. Took a pic of them yesterday. Plan to powdercoat them and get a fifth wheel for the back.
 

Attachments

  • image.jpg
    image.jpg
    135.9 KB · Views: 728
JDM porn

Other than the swap and sourcing open items for it I've mainly been planning my one man summer ExPo. Was time for an update though...

Went back and forth :fencing:yesterday with member [MENTION=85087]Trikz[/MENTION] over JDM parts and I ended sourcing a triple din dash for him at a fraction of the eBay price he found it for (check out the slide out tray at the end of it) On my end I purchased an aux cabin air filter, still got a couple of parts I plan to get before shipping everything. Easiest to get these days:

Clear corners
Spoilers (but bulky)
Tailgates (good luck shipping)

Not so easy:
Field Monitor Units
Light covers
Grilles
 

Attachments

  • image.jpg
    image.jpg
    64.1 KB · Views: 666
More

With the current exchange rate things are in the favor of the American dollar. Here's the back of the dash. There's a storage box for the bottom tray or you can attach a radio unit or Field Monitor unit, not the SURF monitor however.
 

Attachments

  • image.jpg
    image.jpg
    64.7 KB · Views: 663
One down

This is my purchase, the aux cabin air filter. Should attach without any modification to the overhead light. On thing will be sourcing a filter locally but should be rocket science.two lights in the unit which should be standard and then the filter options.
 

Attachments

  • image.jpg
    image.jpg
    59.6 KB · Views: 673
Can't wait to get the parts! Thanks for finding that triple din dash! JDM parts are an addiction... it's great!!! Lol
 
Something interesting...

Found an Optitron Meter, basically an LED type odometer introduced but limited for the 99-02. With my swap I don't need it but I've never come across one for sale. Very impressed with this one...
 

Attachments

  • image.jpg
    image.jpg
    43.4 KB · Views: 664

Members online

No members online now.

Forum statistics

Threads
278,310
Messages
3,554,078
Members
248,016
Latest member
Advally Service

Trending content

Back
Top