• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

Group buy: Built Right UCA's

Just spoke with James, he said they got the new batch in last night. Mine is being shipped today :) yay!! Its been long wait, but they are a local shop, and I want to support them. So I just can't wait doe them to arrive here. I'm sure you guys will be getting them very very soon
 
NuclearN8 said:
that sucks and you're defintely more understanding and patient than me. Good on ya. If the tracking number doesn't show shipped by the morning of May 4th, I'm calling for refund. If they're in stock, they're in stock and by that time the group buy will have closed (30 april) so no good reason not to ship.
Click to expand...

Be patient about the tracking # it took me a while for it to show up on UPS, I don't know what it is, but it doesn't show up right away. Like after few days it does. So don't sweat it. Give it few days.
 
NuclearN8 said:
I've paid, was emailed an invoice with tracking number but obviously nothing has shipped yet as the tracking # isn't active. Any idea when shipping will begin [MENTION=115003]Be_Original[/MENTION] ?

The first post made it seem like these were in stock and ready to ship.
Is the truck shop just waiting for at least 15 people to pay before shipping?

I'll let them hold my money for 2 weeks without shipping, then I'm calling to get a refund.
Click to expand...

All that received an invoice are probably in the same boat, along with me. The first shipment was yesterday evening. Another shipment will happen on friday then the last will be monday. I dont understand why the tracking numbers have not been registered as of yet. I will give it until tomorrow, if nothing appears then I will call James to confirm if and when he shipped along with how many.

Sorry for the inconvenience.
 
chiahead52 said:
Mine is showing in Arizona so I may have mine tomorrow.
Click to expand...


received mine today and WOW these things are beefy! Still checking them out but holy crap! I need to look at some install stuff for TC.

Also, what sort of assembly lube should I use on the bushings? I already know about using the triflow on the uniball, just not 100% on the poly bushings. On my sway bar bushing I am using Redline synthetic. :)
 
Last edited:
chiahead52 said:
Thanks for the video. What lube do you plan to use on yours?
Click to expand...

Still doing research on lubricant but this seems to be the route I may go:

Tri-Flow® Superior Dry Lubricant: 5.89[
Tri-Flow® Superior Dry Lubricant is an elite formula created for dry and dusty conditions. The 2oz drip bottle applicator, allows for deep penetration in hard to reach moving parts. Featuring paraffin wax and high-grade petroleum oil to allow the lube to go on wet, but then set up in a dry, 'wax-like' film so it will not attract or absorb grit and grime. Perfect for dry, dirty, dusty conditions, while still providing adequate wet weather performance. Holds up to extreme pressures and resists water wash-off. Provides incredible efficiency without attracting an excessive amount of contaminants. Great for Uni-Ball bearings.
 
Be_Original said:
Still doing research on lubricant but this seems to be the route I may go:

Tri-Flow® Superior Dry Lubricant: 5.89[
Tri-Flow® Superior Dry Lubricant is an elite formula created for dry and dusty conditions. The 2oz drip bottle applicator, allows for deep penetration in hard to reach moving parts. Featuring paraffin wax and high-grade petroleum oil to allow the lube to go on wet, but then set up in a dry, 'wax-like' film so it will not attract or absorb grit and grime. Perfect for dry, dirty, dusty conditions, while still providing adequate wet weather performance. Holds up to extreme pressures and resists water wash-off. Provides incredible efficiency without attracting an excessive amount of contaminants. Great for Uni-Ball bearings.
Click to expand...


ya I have this and also the one in the spray can....also the tube grease. Not sure about using these in the zerq fittings. I plan to use the triflow on the uniball though.
 
I received mine and am VERY impressed by the build quality/powder coat. Is anyone having trouble getting the bottom misalignment spacer to sit in the Uniball? my top one goes in easy but I can't get the bottom one in on either UCA for the life of me
 
tucktuck8 said:
I received mine and am VERY impressed by the build quality/powder coat. Is anyone having trouble getting the bottom misalignment spacer to sit in the Uniball? my top one goes in easy but I can't get the bottom one in on either UCA for the life of me
Click to expand...

Hopefully with research or someone chiming in you can figure it out. Hope to receive mine today.
 
tucktuck8 said:
I received mine and am VERY impressed by the build quality/powder coat. Is anyone having trouble getting the bottom misalignment spacer to sit in the Uniball? my top one goes in easy but I can't get the bottom one in on either UCA for the life of me
Click to expand...

why not just call the truck shop and ask james how they do it then share the info for others on the group buy?
patiently waiting for mine...
 
image.jpg

Received. Very happy with the build quality, I will say that the "built right" stickers will be coming off first thing as they are peeling off.
 

Attachments

  • image.jpg
    image.jpg
    143.6 KB · Views: 240
image.jpg

Be sure to file down the grease zerk fitting holes before installing the bushings to prevent damage when installing.
 

Attachments

  • image.jpg
    image.jpg
    131.7 KB · Views: 210
You must log in or register to reply here.

Members online

Total: 1,018 (members: 4, guests: 1,014)

Forum statistics

Threads
278,314
Messages
3,554,095
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top