LawnDart
Senior Member
Coil spacers, as it's sounding like you're not getting the forward rake you need.
HaydenATX's '15 TE-The Yeti
- Thread starter Haydenatx
- Start date
Coil spacers, as it's sounding like you're not getting the forward rake you need.
Haydenatx
Member
For sure. Ya I'm trying to decide if another 1.25" in the back might be too much. I ordered the SAW 1.5" rear coils that are stiffer and will handle weight a little better but I'm afraid it might be too high... I'll probably still do it and hope I don't look like a dragster.
LawnDart
Senior Member
Do you carry gear in the back on trips? Or tow? It's better to have some forward rake and then it level out when on trips.
Haydenatx
Member
Definitely have it in the truck. Eventually I'll get a trailer but that'll be years. I think the SAW coils will be perfect
RealMcCoy05
New member
Do you have a link to where you got the platidip in this color? I would like to do the same to have the back match the frontSwapped the rear valence and plasti dipped the badges to match the pro grill. Shout out to [MENTION=127657]codyHTX[/MENTION] for the help
Haydenatx
Member
RealMcCoy05
New member
So that's not the same as the gunmetal gray they have on their website? Is there a certain brand you used?
Awesome build! Maybe I missed it but which Shrockworks sliders did you order? Did you call them or order online? What did you tell them exactly? It seems they have different pictures on their website and no difference in the order section. I like how flat yours are and how they can be used as a step. Thanks.
Haydenatx
Member
Thank ya. They are textured black powdercoat with dimple plates. I ordered them via email because we worked out a product trade... If I were you I would call them and they will make sure to get you the ones you want.
so do you actually work for....them...? being obtuse on purpose.
Haydenatx
Member
Being obtuse because they might not appreciate me publishing that. I work for YETI and they were looking for some coolers.
i meant i was being obtuse, in case you didn't want to give that info out.
Haydenatx
Member
Finally got around to cleaning my trd wheels after a year of not taking care of them. I used to use that stupid armor all tire wet and it left a gross residue on my tires and wheels. Bought some wheel cleaner and tire cleaner from Adams polishes and they did a killer job.
before
after
Last edited:
susanbanthony25
New member
It may sound weird but some of the LED's i have installed you need to swap the wires (black on the positive and red on negative). I am not sure if the dually's are like this. I can't remember but if not I would double check your connections at the switch.
Haydenatx
Member
Thanks for the tip! I have heard of this too.
Just tried it and still nothing unfortunately.
Clarkie152
New member
Do you have a multimeter?
Unplug the light and see if you're getting power to the plug. If not, trace back to the relay.
Sent from my iPhone using Tapatalk
Unplug the light and see if you're getting power to the plug. If not, trace back to the relay.
Sent from my iPhone using Tapatalk
Clarkie152
New member
How's the output?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
