HaydenATX's '15 TE-The Yeti

[shrub1]

I think it looks like a proper build even with the slight rake. You don't want a saggy butt when you are loaded up for a trip. Nice job!

 

[Spokanesteve]

Recovery point question

If you get a minute could you explain what you have going on with your recovery points? It kind of looks like hard mounted shackles?

Thanks, Steve.

 

[Haydenatx]

If you get a minute could you explain what you have going on with your recovery points? It kind of looks like hard mounted shackles?

Thanks, Steve.

Hey Steve,

Those are actually just D-ring shackles from 4wheelparts that attach to the factory recovery points. About $15 a piece

 

[Haydenatx]

Spent a little time on the trails at Hidden falls adventure park today.

 

[Jamart5]

You still on stock coils on front?

 

[Haydenatx]

You still on stock coils on front?

Yep, front coils are stock.

 

[Jamart5]

Yep, front coils are stock.

You only added the saw because of the extra weight correct?

 

[Haydenatx]

You only added the saw because of the extra weight correct?

I wanted to keep rake when loaded down. With 1.75" in front and stock rear coils plus little 10mm spacers it sat with no rake at all, almost negative frame rake. Put a couple of dogs and gear in the back and it was sagging.

 

[Jamart5]

I wanted to keep rake when loaded down. With 1.75" in front and stock rear coils plus little 10mm spacers it sat with no rake at all, almost negative frame rake. Put a couple of dogs and gear in the back and it was sagging.

Gotcha, thanks man I want do my build like yours. Keep the mods coming ..:cheers:

 

[Rashnu]

Have your SAW's settled down @ all?

 

[Haydenatx]

Have your SAW's settled down @ all?

They have slightly and feel much softer than I was expecting(in a good way). I will try and get a pic on flat ground soon.

 

[Lost27]

Pretty sure I saw your rig last night at the Yeti Flagship Store Grand Opening last night.

 

[Haydenatx]

Installed the awesome orange boxx fab custom Molle panel that the homie [MENTION=127657]codyHTX[/MENTION] gave me as a bachelor party gift. This thing is rad!

 

[boostedbowman]

Sweet ride.


Sent from my iPad using Tapatalk

 

[Haydenatx]

Spent last week in Durango Colorado for my bachelor party. 2100 mile round trip with a full truck.

 

[OrangeBoxxfab]

Installed the awesome orange boxx fab custom Molle panel that the homie [MENTION=127657]codyHTX[/MENTION] gave me as a bachelor party gift. This thing is rad!

Had I known you was a Star wars fan I would have done something different in the cut out. Never the less I hope you enjoy them.

 

[Haydenatx]

Swapped the wilco hitchgate solo for the solo hi-clearance!

 

[CoMtn4Runner]

Slapped some 275/70/17 KO2s on it today. Rubs like a mother. Now to decide on this 2" icon spring install.....

Have you hit your shackles on rocks while wheeling? Seems like they would potentially catch on rocks and reduce your approach angle.

 

[Haydenatx]

Have you hit your shackles on rocks while wheeling? Seems like they would potentially catch on rocks and reduce your approach angle.

I haven't noticed it. They swing so they have some give. [MENTION=127657]codyHTX[/MENTION] bungeed his together to make them lay flat against the skid

 

[StrmTpr]

Swapped the wilco hitchgate solo for the solo hi-clearance!

How do ya like the wilco?? Does it move around in the receiver any? Seems like it would move side to side a bit. Nice rig man! Keep up the build.