Heartguy’s 17 ORP

72111f53d391594f4ac81c17be65cb77.jpg


Part 1 of roof rack delete done! What a mess getting all of the sealant off from the Prinsu rack.


Sent from my iPhone using Tapatalk
 
Buttoning up my rack delete today. Also figuring how I will mount my plate on the new rear bumper. I was originally going to go with a tire mounted system, but since my Maxtrax will be mounted there I may go this route:
C31002_500.jpg
 
Here’s how I sealed my rack delete. I used RV butyl putty under the brackets and blue loctite on the mounting hardware. I then tightened the brackets down until the putty compressed out. I hope it stays water tight!


e01795bb170e085c32c7265b83020421.jpg

ffdcabd8f3c7e84ae72bc644dda563d5.jpg

8c530fdced147a40aefd12f825dec292.jpg

9714cafde6c94d3baa0785acffa24bd6.jpg

7df23c482bfb28afc80a0c22eda69b92.jpg



Sent from my iPhone using Tapatalk
 
Small update: I returned the Curt hitch mounted license plate holder and purchased a RockHard4x4 unit that is meant for a Jeep. Just so happens that their kit is drilled for 6 on 5.5 as well! I ended up not liking the look of the hitch mount.

66914.jpg
 
dfd44e4627b18e8360de214ad36d532d.jpg


My spare tire showed up today! Now I just need to get my rear bumper on there so I can mount it!


Sent from my iPhone using Tapatalk
 
Last edited:
Call me crazy, but I think I may get rid of my PRO grill. I am starting to miss the look of the factory, clean grill. Any thoughts?
 
Call me crazy, but I think I may get rid of my PRO grill. I am starting to miss the look of the factory, clean grill. Any thoughts?

I don't think you're crazy. Now that Toyota dealerships put PRO grills on just about every new 4Runner (at least here in the southeast), it's almost refreshing to see a modded 4R with the normal grill. I'm still on the fence about making the switch to TRDPRO grill.
 
Call me crazy, but I think I may get rid of my PRO grill. I am starting to miss the look of the factory, clean grill. Any thoughts?

The line has already started to buy it from you.........

I still like the pre refresh "satoshi" grills the best but for 14+ the Pro grill is a good option
 
Unboxing! The quality of build on this bumper is very high.
6929cfd4ecff3d5e95222114fdee310b.jpg

7eb9a18446697e241a7651135d893644.jpg

5c32555419c760eef7856597ff794518.jpg

dee65984173ef748f923b498ec6678bd.jpg


Updates will come as the install progresses....

Sent from my iPhone using Tapatalk
 
Got the internal brackets installed and hitch plug relocated. I just need to figure if I have enough wiring to do my license plate light. Overall install is simple, the provided directions and pictures are completely useless.
886730a7c1dcf564c3cfe28f8c135559.jpg

d8d965a01f788a779a95dd8e67686864.jpg
f0a8dc3e6ff9852b3eec6096d11914a9.jpg



Sent from my iPhone using Tapatalk
 
Bumper is on and looking great after some adjusting! I cut and repurposed the rear mud flaps to solve a common rubbing issue on the rear flare.
ce0aaa8890b1619a2353c9933947e4c9.jpg

9fc526ef8523b21ce03ab0e8b199c71a.jpg
0ebf76569ea2775acab2912fcad9a753.jpg
2f3adf0b6d221c46748f3d65ce436d1b.jpg

91ea27b35f41a90188ee2765ee5fd1f2.jpg

d54ecf2648bc84553d65c8cfa0a1b8df.jpg



Sent from my iPhone using Tapatalk
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,087
Members
248,016
Latest member
Advally Service

Trending content

Back
Top