Help with Remote Start install

[gimmie93]

I think i found the problem but not sure what to do in order to fix it..

The H3/8 red/black wire is wired to 12v constant and has voltage on both sides of the fuse and going into the alarm.

Testing the H3/3 orange accessory output and the H3/4 violet starter output there isnt any voltage coming out of the remote start when i try to remotely start it.

Ill try a couple things in the morning, but any ideas would be appreciated.

 

[gimmie93]

Bump!

 

[gimmie93]

Finally got the remote start to work :whoo:

I had a intense audio look at my alarm and they said that my key sense wire on the pkall bypass was attached to the yellow/red wire which it was actually the blue wire, though the 99 limited wiring diagram said yellow/red the pkall wiring diagram said blue.

But,

Even if you fixed that it still wouldn't work.. turns out i had a defective brain and had to take it back to Petra and get it replaced.

Now it works like a charm!

Also thanks to everyone who helped me out with my remote start, really appreciate it!

 

[hrt4me]

I guess you were unaffected by today's tornado?

 

[gimmie93]

It was about 30 miles south of me. I went down there to see if i could help but the police wouldnt let us through. Its devistating to see the damage first hand..