Old thread?
This looks like an old thread, but figured I'd give my input. I just got my second TR4. First one was a 1995 Limited 4x4 and 119,000 miles. It had the notorious failed head gasket at the back on driver side head where the crossover connects. It was BAD. Under 14psi on the coolant system it would fill up the cylinder in a few seconds. I got that one in a trade so I nothing in it. Before I got around to repairing it, I found a 2000 SR5 4x4 with 267,000 miles. Runs great, but does have leaking valve covers. I gave $1900 for it. I sold the 1995 the next day for $1000, so I have $900 in it. Now I'm replacing all of the front suspension bushings, CV axles, Upper and lower ball joints, upgrading the rotors/calipers, steering rack bushings, inner/outer tie rods, sway bar end links, ect. I will say that Toyota could have done a better job of making this TR4 more service friendly. Most of what I am doing isn't really necessary, but I figured I'd go ahead and replace all of this while some if it was apart anyway. I'm planning on riding trails so I don't want any failures out there, if possible. Uwharrie can be rough. By the time I'm finished I'll have far more money invested, but feel it'll be worth it. The day after I bought the 2000 a guy offered me a little more than I initially paid for it, but I figured it wasn't worth trying to find another TR4 3rd gen in this good of shape overall. I may have what it's worth tied up in it, but working on them is half the fun, most of the time anyway.