A few things I've done/recommend:
- AIR FILTER - If you're not feeling to ambitious, at the very least make sure that your engine air intake filter is clean. Aside from simply replacing it with another OEM-type paper, a K&N-style oil-based filter can be dropped in instead. However, don't expect huge benefits (
citation). Doing the Hydrocarbon Filter Delete modification will further improve airflow, but at the risk of potentially rendering your vehicle in violation of your state's environmental law (if they follow the CARB regulations).
- TIRES - Low tire pressure can improve acceleration as the contact patch between the vehicle and the road is increased. Higher tire pressures can improve higher top speeds and fuel economy by reducing contact patch, effectively reducing resistance to the wheel's rotation. If you are shopping for tires, there are tires that offer lower rolling resistance through the use of a harder rubber compound. This feature helps improve mpg. Note that tire tread is also important safety feature that should never be ignored.
- AIR CONDITIONING - The fan and compressor are run by the engine, effectively reducing the power available to the wheels. Even though it is summertime and hot, if you're just making a quick trip in city-driving conditions, you're better-off leaving it off and rolling down a window. As air resistance becomes a greater factor at higher speeds, roll-up the window on the highway and then turn on the a/c.
- OIL - Next time you do an oil change, use synthetic. It costs a bit more, but it is worth it.
Click here for reasons why.
- SPARK PLUGS - If you have the V6 4Runner, Toyota recommends changing them every 30,000 miles. If you have the V8 4Runner, Toyota recommends changing them every 100,000 (*kinda -
see page EG-167 - documentation produced for the same engine's application to the Tundra indicates they should be changed every 60,000 miles)
- AIR INTAKE - If you feel a bit more ambitious, there are quite a few cold-air intake systems out there. They mostly (I think) violate CARB regulations due to the lack of a Hydrocarbon Filter system, however if you're handy and enjoy working on your car, switching out between an intake system and the stock system shouldn't take very long (~an hour and a half) for when your car needs its annual inspection (if you're in a CARB-adopted state). They are a bit pricey, but deals can be had if you shop around - I found a K&N 63-Series kit for $200-off on Amazon. By my calculations, I've been getting around 3 mpg better/per tank (driving style varies).
- MASS AIRFLOW SENSOR - There is a sensor in your air intake that the car uses to regulate the fuel mixture in the engine. Yes, there is a filter for the air, but the sensor can still get dirty. You can find a bottle of CRC MAF Cleaner for usually under $10 at any auto parts store. Note that the sensor is extremely fragile.
- THROTTLE BODY - Carbon deposits can build up on the throttle body area. You can find a bottle of CRC Throttle Body Cleaner for usually under $10 at any auto parts store. Note that you'll have to manually manipulate the throttle body.
- SEAFOAM - I'm planning on using it this weekend, but SeaFoam is a powerful cleaner that can be introduced into the engine through the vacuum line to clean out carbon deposits built up within the engine.
- REDUCE WEIGHT - Not suggesting anything major, but I saw a significant mpg improvement after I pulled my third row seats out. If it's removable and it doesn't have to be in the car, why waste the energy hauling it around?