How to keep cupholder inserts from popping out attaching to cup?

[Brandonium]

Unless you have one arm I would...use your other arm to pull it off. It's not that hard unless you are shoving a liter of cola in there.. Are you into liters of cola Farva?

 

[TPz_Fuchs]

I used Velcro to hold the cup holder in. Use a big piece and make sure you get a good bond. Still didn't work as well a my big Yeti tended to get stuck and pull the holder out, Velcro and all. Then, by mistake, one of those cardboard coffee sleeve thingys fell into the cup holder, and voila, it keeps your cup from sticking. So go to Starbucks, get a cup of coffee and your new T4R accessory.

 

[dot_tom]

I picked up some of those cupholder absorber discs. Mine has a black bear on it. Anyway, it sits the tumbler high enough that it does not get stuck. Also absorbs any water from other cups.

I actually just ordered these....

https://www.amazon.com/Thirstystone...22&sr=8-11&keywords=thirstystone+car+coasters

O-H!

 

[gbarr]

I just put three small globs of RTV on the bottom of the cupholder and let it dry overnight and problem solved, done this about a year ago.

 

[SidKo]

I was able to get my hands on a roll of butyl tape. It's like fun-tack, putty tack, or adhesive putty, but more aggressive in its bonding properties. It is removable.

Roll up a small ball and place under the holder and press down. Molds to the void/space.

 

[HanginInUtah]

I picked up some of those cupholder absorber discs. Mine has a black bear on it. Anyway, it sits the tumbler high enough that it does not get stuck. Also absorbs any water from other cups.

I actually just ordered these....

https://www.amazon.com/Thirstystone...22&sr=8-11&keywords=thirstystone+car+coasters

O-H!

Best idea yet... except GO UTES!! :heh:

 

[03_4x4Runner]

This is an old thread about this subject. http://www.toyota-4runner.org/5th-gen-t4rs/219047-rubber-cup-holder-irritating.html

 

[1996_Valencia_Owen]

For when you need to tug on the move. :cheers:

Does anyone know if Gobi sells fleshlight mounting brackets for my rig yet?

 

[Kashoggio]

Most of the days I use my 30oz yeti cup . The black inserts stays stock on the cup so I just lift and drink with the silly thing on, No biggie

 

[theothereng]

I picked up some of those cupholder absorber discs. Mine has a black bear on it. Anyway, it sits the tumbler high enough that it does not get stuck. Also absorbs any water from other cups.

I actually just ordered these....

https://www.amazon.com/Thirstystone...22&sr=8-11&keywords=thirstystone+car+coasters

O-H!

x2. These are great....unless they say Ohio State on them. I-L-L

 

[STX4Runner]

This is an old thread about this subject. http://www.toyota-4runner.org/5th-gen-t4rs/219047-rubber-cup-holder-irritating.html

And that OP was rightly shamed for such a pointless thread. LOL Really, we can't figure out how to operate a cup holder without the internet?

 

[dride]

The rubber cup holder stays with my drinking device until I leave the vehicle.


Sent from my iPhone using Tapatalk

 

[manganos]

A dab of super glue


Sent from my iPad using Tapatalk

 

[dot_tom]

x2. These are great....unless they say Ohio State on them. I-L-L

Best idea yet... except GO UTES!! :heh:

Ha, I did see they offer lesser teams as options :shrug: jk

 

[troopert4r]

What I did was velcro the bottom of the cup holder. Sometime it would still come out. Then I cut a couple of 2.7" dia, .25" thick disks from some black rubber sheet I had laying around and problem solved.

It's the little things that drive people the most nuts, myself included. lol

 

[Mutant138]

Fleshlights? Twisting and pulling? I prefer pumping and dumping personally.


30oz yeti and knockoffs do this quite well. I've been throwing loose change in the bottom of the cupholder inserts and that keeps them from seating all the way down. Plus ever so often I can pick up a sammich with that change.

Been wanting to keep my truck cleaner tho so I'm going to go with velcro.

 

[efinkens1]

I keep a plastic bottle cap in the bottom of the cup holder. Yeti tumbler doesn’t stick or wobble.


Sent from my iPad using Tapatalk

 

[mrblah]

Velcro

 

[Groove1797]

Velcro

I'll second this. I bought this (link below), cut the circles as best as i could and it's worked perfect. A bonus it that it will cut down on any rattling noise from my bigger Yeti's.


https://www.amazon.com/VELCRO-Brand-91885-Industrial-Professional/dp/B00JJPQ272?ref_=fsclp_pl_dp_2