i want to convert my 4x4 auto trans to 4x4 5 speed

dcadina

New member
Im looking to convert my transmission, just not sure where to get started. I live in hawaii, wheres a good place to get all the parts i need. About how much will this cost me. Need some advice.
 
Register to hide this ad
Im looking to convert my transmission, just not sure where to get started. I live in hawaii, wheres a good place to get all the parts i need. About how much will this cost me. Need some advice.
Forget it, it's impossible. If you want a vehicle with a 5 speed then buy one with a 5 speed! You don't have any reason to use a 5 speed on Hawaii though.
 
Im looking to convert my transmission, just not sure where to get started. I live in hawaii, wheres a good place to get all the parts i need. About how much will this cost me. Need some advice.

Lets start with what year your vehicle is. If its an earlier generation that was originally offered in a manual trans, then you can basically wait to find a wrecked truck or just start calling salvage yards.
 
Lets start with what year your vehicle is. If its an earlier generation that was originally offered in a manual trans, then you can basically wait to find a wrecked truck or just start calling salvage yards.

I have a 94. does it have to be a 4runner trans or any 4x4 5 speed will work?
 
I'll be honest I don't know the second gen's that well. I would assume that the truck of the same era would share transmissions/transfer case but I wouldn't swear by it. Try posting the question in the classic section. You will probably get a better response from someone who know the 2nd gen's far better than I do.
 
I'll be honest I don't know the second gen's that well. I would assume that the truck of the same era would share transmissions/transfer case but I wouldn't swear by it. Try posting the question in the classic section. You will probably get a better response from someone who know the 2nd gen's far better than I do.

Oh okay thanks
 
I have a 94. does it have to be a 4runner trans or any 4x4 5 speed will work?

1) It really helps to know what engine you have.
B) You'll need to swap the trans and t-case.
3) The EFI ECM uses signals from the AT, so you'll have to work around that.
4) You'll also have to do some drive shaft work.
E) Use the Search function in the Classic forum, this comes up all the time.

and that's the short list.
 

Members online

No members online now.

Forum statistics

Threads
278,315
Messages
3,554,125
Members
248,016
Latest member
Advally Service

Trending content

Back
Top