Installing hd billies need help with torque spec

[WHORERUNNER]

Im planning on changing my stock shocks with some regular hd billies. I cant find torque specs. Well the only thing I found was 14ft lbs on rear top nuts? What about lowers and also the fronts. I'm planning on taking the struts to a shop to swap the shocks out. Any help thanks.

 

[LittleCaesar]

I know the lower rears are 47ft/lbs but cannot remember the fronts at the moment.

I post again after work unless you have time to flip through the FSM:
North Carolina Toyota Territory Off-Roaders Association

 

[PitbullRescuer]

Torque until real tight. I didn't use a torque wrench on mine.

 

[quicksilvr]

Torque until real tight. I didn't use a torque wrench on mine.

^this, but I'd say just tight. Not "real" tight. There is rubber between everything you are tightening, don't fret about a torque wrench. Just make it tight. It's possible to completely smash and misshape the rubber bushings if you go crazy tight.