Intake manifold gaskets Victor Reinz or Felpro

[yota-runner]

I replaced my knock sensors and I'm about to get a intake manifold gasket set. I want to do this right the first time and i have no idea if there is any difference between Felpro and Victor Reinz.
Here's a link to the parts: Intake Manifold Gasket | 1996 Toyota 4 Runner 4WD 6 Cylinders N 3.4L EFI DOHC | AutoZone.com

 

[packweco]

While I know it's expensive, I have for the most part made the switch to oem gaskets on in depth repairs that I do on my cars/motorcycle. The extra cost is well worth it if you don't have to do it twice. I've never had aftermarket gaskets seal or fit as well as oem.

As always with gaskets, it's more about the prep than anything else. Make sure to scrape off all old gunk with as little damage to the surfaces as possible, and clean with acetone or some other solvent before installing to make sure oil and junk is completely gone.

 

[chadsy]

I've heard nothing but good things about Felpro.