KMAYO 2000 Green Runner Build

[llennium]

trying to put me out of work I see... fine, see if I care

LOL. Options..........:moon:

 

[KMAYO]

[MENTION=67046]KMAYO[/MENTION] I should be available all day Friday if you want to knock this out earlier in the day. I will have family coming into town that afternoon so I'm out then. Glad to help.

[MENTION=23427]llennium[/MENTION] That sounds good. Does around 9:00 sound good?

trying to put me out of work I see... fine, see if I care

[MENTION=58830]JWaldz[/MENTION] I promise you can help next time! :becky:

 

[llennium]

Works for me.

 

[KMAYO]

So Friday [MENTION=23427]llennium[/MENTION] and I were able to get the Shrockworks bumper on without "too much" issue. (Considering the fact that my brother-in-law and father-in-law had beat on the brackets with a sledge hammer attempting to put the bumper on the weekend before. :sobbing

And now to the pictures! (apologies for these being crappy cell pics)







And here is a little flashback for your viewing pleasure!

 

[TxBxSx]

The bumper looks like it is sitting a little low. You might have it mounted on the lower set of holes in the bumper. We use these in combination with our 2" body lift brackets to space the bumper back down an inch and accommodate a 1" body lift height.

It might also just be the picture angle, because it looks better in the last pic. :bigok:

 

[KMAYO]

The bumper looks like it is sitting a little low. You might have it mounted on the lower set of holes in the bumper. We use these in combination with our 2" body lift brackets to space the bumper back down an inch and accommodate a 1" body lift height.

It might also just be the picture angle, because it looks better in the last pic. :bigok:

[MENTION=63082]TxBxSx[/MENTION] I do agree it could be moved up closer to the body. When it was installed i was just glad for it to actually be on the 4Runner. I will more than likely try and adjust it some more later on.

 

[KMAYO]

I have been MIA for a while between work and working around the house.

Some of the major things i need to get done:

-Make new extended power cables for the winch controller and mount the controller box.
-Install this dimmer switch with Fog light switch I just ordered, and hopefully make this control the PIAA fogs.



Also need to sand blast the my other 3 rims and paint them.

Clearest picture of 1 painted rim.




Hopefully more progress will be made soon!