emelianenkov
New member
Nah, I was just adding to the off camber parking photos haha
Lift and Tire Central (pics)... Post 'em Up!
- Thread starter hammersc
- Start date
LTDSC
New member
should be 1-1.5" depending on age and miles for the coils.
christianwitha4th
New member
What kind of extended brake lines do you use? I want to get a setup like yours.
So 3ish at 2.5 on 5100s?
LTDSC
New member
should be right around 3" if not a hair taller.
Doozi
New member
At 3", you're going to lose a lot of caster angle and will more than likely feel the instability that comes with that loss. Aftermarket UCA's will get your caster angle back to spec and will also slightly improve your suspension travel. They're easy to swap out and well worth it, in my opinion.
Nathana92
New member
I should do one of these. We have a GX and 2 4Runners.lol
HokieRunner
New member
Lift:
F: OW spec Radflo 2.5 700# Extended Travel (1/2" thread showing) / LR UCA
R: OW spec Radflo 2.5 / 220# coils (1.5 daystar spacer on DS to fix 'Yota lean)
Wheels/Tires:
17 x 8 Konig Six Shooter in Metallic Graphite / 4.5 BS (0mm offset)
285/70/17 Goodyear Wrangler Duratracs
NO bodylift...yet
NO wheelspacers
And yes...the running boards need to go but until I get sliders they're staying on for my family and girlfriend.
F: OW spec Radflo 2.5 700# Extended Travel (1/2" thread showing) / LR UCA
R: OW spec Radflo 2.5 / 220# coils (1.5 daystar spacer on DS to fix 'Yota lean)
Wheels/Tires:
17 x 8 Konig Six Shooter in Metallic Graphite / 4.5 BS (0mm offset)
285/70/17 Goodyear Wrangler Duratracs
NO bodylift...yet
NO wheelspacers
And yes...the running boards need to go but until I get sliders they're staying on for my family and girlfriend.
Nashvillerunner
New member
Lift:
F: OW spec Radflo 2.5 700# Extended Travel (1/2" thread showing) / LR UCA
R: OW spec Radflo 2.5 / 220# coils (1.5 daystar spacer on DS to fix 'Yota lean)
Wheels/Tires:
17 x 8 Konig Six Shooter in Metallic Graphite / 4.5 BS (0mm offset)
285/70/17 Goodyear Wrangler Duratracs
NO bodylift...yet
NO wheelspacers
And yes...the running boards need to go but until I get sliders they're staying on for my family and girlfriend.
WOW LOVE it! Great looking 4runner. I love those wheels. The only thing you need is some sliders.
05 Skinner 4x4
New member
NDRunner06
New member
nghiS4
New member
Wow. 255's never looked so good! Are you running wheel spacers? What's your center-of-hub to fender height?
EDIT: Kenda Klever's seem pretty new, but look cool. It'll be interesting to see how they do. Seems most like them so far. Especially since they're so inexpensive!
Last edited:
stanleybb50
New member
Definitely - I was practically flipping a coin between level 8's and the ATX Crawls I ended up with a couple months ago, so I am sure those are 8's.
ply2win
Member
Yeah, the new MK6 in matte black. I Had a hard time picking out new wheels but I love these things.
Similar threads
