Lift issues

[JSchock]

I put the Cornfed 3 in the front 2 in the rear on my 05 4runner. I bought new wheels and tires and after installing them I had some rub issues. I decided to go ahead and replace my springs with the OME full upgrade. This gave me the tire clearance I needed but now I am having rubbing issues with my upper control arm and the new spring. I called a company about upgrading my UCAs and I was told that it wouldn't not help my situation and that I needed to take some lift off. I have uploaded some photos so hopefully I could get some other opinions. I don't want to take my lift off if I can help it. It is hard for me to belive that a better UCA would not help me here. Thanks in advance!

 

[wnelax04sr5]

wait so youre running a 3/2 spacer lift on top of an OME lift? thats not a good combination

 

[JSchock]

Yeah thats what I have on there now. The OME is just new springs, the cornfed is a spacer

 

[wnelax04sr5]

Yeah thats what I have on there now. The OME is just new springs, the cornfed is a spacer

what springs did you put on? what shocks do you have?

 

[S p a r k y]

Yeah thats what I have on there now. The OME is just new springs, the cornfed is a spacer

Holy CRAP!! yea you need to take those spacers out ASAP! you have 2.5-3" lift springs as well as a 3"net spacer. That's extremely dangerous. Are those pics taken with the tires on the ground?

Also you are going to have to have UCA's, you have a torn upper ball joint boot in one of those pics. Edit: maybe its not turn, just pulled off.

Either way, you are trying to run almost 6" of lift in a way that is not possible

Not to mention, running 4" in rear.

 

[JSchock]

•OME 884:front
90000 Nitrocharger Sport Front Shocks
•OME 895: rear
60004 rear shocks

 

[wnelax04sr5]

i would pull that spacer absolutely immediately. youre taxing your front IFS in a way it was never designed to handle

 

[JSchock]

yes the tires are on the ground and i have my wheel turned all the way to the right, this is my front right tire

 

[JSchock]

Ill go ahead and take the spacers off and get some new upper control arms. Thanks for the help

 

[tucktuck8]

op2:

 

[S p a r k y]

yes the tires are on the ground and i have my wheel turned all the way to the right, this is my front right tire

I wouldn't move it forward or backward. Lift it up and take Cornfed off! Once you are just with OME stuff. You can go higher by adding a body lift. You can get the 6" of lift you like, but it will take more work and $

 

[cpark_12]

I wanna see a pic of the whole truck before you take those spacers off!!

op2:

 

[S p a r k y]

:iagree:

 

[CDMAC]

Me three

 

[slotoyo]

5.5 / 6 in front lift!

hopefully all goes well when you take the spacer off.

 

[Davy180]

Pictures before removing, I wanna see that thing, it's got to be jacked!

Also what size tires are you running?