Hans Moleman
New member
I just got one too. Been waiting a while for this.
Meso Customs Extened Fuse Cover - In Stock
- Thread starter jrandom
- Start date
jawkdna
New member
Been using it for a few months and its great... never thought the Meso one would come back instock.
daytonaviolet
New member
I was able to order one too yesterday. I’m waiting for meso to make the red push start available for the runners 
ElectroBoy
Banned
I realize MESO is primarily a Tacoma guy, but there’s also a lot of pent-up demand for his 5th Gen 4R gear. Too bad he can’t ramp up his output, but we don’t know the production limitations.
I have the puddle pods and love them. Last year he mentioned a switch/cable product for turning them on anytime as ditch lights, but no further info on that. Also anxiously waiting for a flip fob key.
I have the puddle pods and love them. Last year he mentioned a switch/cable product for turning them on anytime as ditch lights, but no further info on that. Also anxiously waiting for a flip fob key.
kenwilliams0803
New member
Just tried to order. Looks like they are out again already.
daytonaviolet
New member
Just sign up for email. Once available you’ll get an email to purchase when it’s available. But you’ll need to act fast
blksubykid
Member
daytonaviolet
New member
blksubykid
Member
Yeah I guess so...regardless it doesn’t work with my wiring setup for whatever reason
ElectroBoy
Banned
Mine came that way last year too. Just warm it up, peel it off and re-apply in the correct direction.
blksubykid
Member
That isn’t the issue, it just doesn’t fit/work for me.
97BlackAckCL
Elite Member
Just installed my Meso fuse cover, the cover is of nice quality for a 3D printed piece.
Here's a before of the 2 fuse taps that I'm using, the lower one goes out to my amber raptor lights in the front grille, the other goes to the backup battery for my dash cam.
Sadly none of the precut holes in the cover lined up with my fuse taps, so I had to cut my own slots on both sides with a Dremel, this was a bit frustrating but not real surprising. You can see the slot I cut on the right side of this pic since it lined up between the 2 provided slots. After cutting slots on both sides the cover snapped right on. When I first had the original fuse tap for my grille lights I used to kick it out when I put the parking brake on from time to time, but since I ziptied it up higher I haven't had that problem. However it is nice to have piece of mind that the fuses are covered and not exposed right next to my left leg lol.
Here's a before of the 2 fuse taps that I'm using, the lower one goes out to my amber raptor lights in the front grille, the other goes to the backup battery for my dash cam.
Sadly none of the precut holes in the cover lined up with my fuse taps, so I had to cut my own slots on both sides with a Dremel, this was a bit frustrating but not real surprising. You can see the slot I cut on the right side of this pic since it lined up between the 2 provided slots. After cutting slots on both sides the cover snapped right on. When I first had the original fuse tap for my grille lights I used to kick it out when I put the parking brake on from time to time, but since I ziptied it up higher I haven't had that problem. However it is nice to have piece of mind that the fuses are covered and not exposed right next to my left leg lol.
Hey I sent you a vissitor's message since PM wasn't working. Down to buy yours
Cool! I just sent you a message back
jrandom
New member
Previously discussed (obvious typo), but Ol' Dirty Bastard works well
: 
Makes me want to shove a 40a fuse in there...
