mud flaps for SR5
- Thread starter kenjan1970
- Start date
check them out athttp://www.flickr.com/photos/47676672@n08/4362714855/
hey where did you get these for your 2010 runner?
kenjan1970
New member
Click free
ProFit Splashguards with Factory Fit Appearance from RoadSport, a Manufacturer of Splash Guards for Trucks and Cars sorry all for the slow come back, I got them at O'Reilly auto parts and at Advanced auto parts the cost was $29.99 per pair, they are Roadsport profit #7, I tried the #6 and I thought they where too small, as far as installing them I did it in a heated garage and I started by heating them in my oven to 100 degrees and holding them tight to the curve of the fascia till they cooled. I used the included screws to start at the top where there was plastic and sheet metal are,holding it tight and had a friend use a level to keep then vertical, from there on all was hollow so I made a trip back to the auto parts store and they told me to use 1/4 inch fender liner push type connectors I did that and put 3 on each flap as needed, I did it with out removing the rear tired, the front was easy, just turn wheels. If more pixs needed please tell me how to post the pictures better, I think they turned out great.
hoffmandirt
New member
I called my local Toyota dealer and the parts guy said they can order factory mud flaps for the 2010 4runners. He said they would cost me roughly $280.00 because I would have to buy each flap and all of the hardware separate. The mud flaps are not sold as a kit. Has anyone seen these? Are they effective? If I decide to break down and spend the $280.00 I don't want to receive a mud flap that is for looks only. The ProFit splash guards mentioned in this thread are second on my list.
did he mention if they were color keyed or black? seems expensive to not be color keyed.
And are they solid or flexible? I've always found that the solid ones tend to get broken off easily, or are too short to really do any good. The longer flexible ones seem to do the best job - and are what, ten times cheaper? It would be good to see them available anyway - I thought it kind of weird that I could not get mud flaps on a Toyota 4WD vehicle (Limited).
kleerogers
New member
I can not find a custom fit for mud guards for a 2010 4Runner Limited anywhere, does anybody know where to get them other than Toyota (way to expensive)?
Thanks
T4Fun
Banned
toyota makes custom mud guards for 10 4runner? When did they start doing that?
wifesrunner
New member
I would like to know more about the toyota mud guards. I haven't heard of or seen them.
T4Fun
Banned
there arent any yet for the 4R
ImOnAPlain51
New member
I think you are referring to this thread http://www.toyota-4runner.org/5th-gen-t4rs/64054-mud-flaps-ventshields-accessories-8.html. There are some pretty good pics on there. The custom fit mud guards are from Husky.
Snowfox
New member
Hey, thanks for the installation tip, I really like the look of what you got.
richsenkow
New member
mud flaps for 5th generation Toyota 4 runners
I found out after reading about the Canadian versions coming through with them. After calling a Canadian Dealership, I found out that infact dealerships can get them. However they come through in an appearance package and are not sold as an accessory. They run about $30 for fronts and like $40 for rears. All sold seperately but you really have to talk to the parts guys to get him to pull these items out. Again they are available from Toyota but not sold as an accessory.
I found out after reading about the Canadian versions coming through with them. After calling a Canadian Dealership, I found out that infact dealerships can get them. However they come through in an appearance package and are not sold as an accessory. They run about $30 for fronts and like $40 for rears. All sold seperately but you really have to talk to the parts guys to get him to pull these items out. Again they are available from Toyota but not sold as an accessory.
azn-sensation
New member
Interesting... Migh jump in on this.
