drbiii
New member
While driving today I tried to focus on it being the shocks and not the alignment and I believe that is the case (bumps don't steer me off the road, but they do created rocking) however, if you do the bounce test by pushing down on the front a couple of times and then counting the bounces it only bounces once or twice......what is the rule of thumb?...If it bounces 3 times you need new shocks?
The 4Runner shouldn't bob more than once if the shocks are in good condition.
Another thing to check is whether any of the shocks are leaking (look for an oily film around them)
If stock ride quality shocks (kyb) are going to be anything like what Im dealing with now then I don't want them. I came from a Tacoma TRD Sport 4wd and if bilsteins will give me a ride more like that then that is what I want. To me, the tacoma had a perfect ride. Silly me for assuming the 4runner would ride the same.
Are the adjustable 5100s stiff like the HDs that I linked. Also, can you adjust the height easily?
Bilstein - KYB - Rancho - Monroe - Edelbrock Automotive Truck Shocks and Struts - Shockwarehouse.com
5100's will allow you to change the ride height, but it won't be easy. You basically have the ability to set the lower spring perch in three different settings (low=stock height / high=2.5" / middle=somewhere in between?).
In order to change the ride height, you'd have to pull the front shocks, compress the springs, reset the perch, the reinstall.