Need help with a part #... Yota parts guy was stumped

[RedDragonATL]

I am looking for the part #s for a couple of attachment pieces for the passenger side rear fender flare for a 2000 SR5 4Runner. The guy at the parts counter at my "usual" dealership couldn't find them...he said they were an option supplied by Bushwhacker? Not sure if he knew what he was talking about. I only had one piece of a broken one with me, and it didn't have the "point" on it, so he couldn't find one close, he said. Ugh...an hour of my life I'll never get back (driving over, waiting on him for a half hour or so...).

So, I did some more research online and could only find the fender flare clips for the front fenders (67771-28020). Are the ones on the back the same? The pics in the diagrams aren't nearly detailed enough for me to tell if they are the same.

Also, there are what looks like rivets on the bottom side of the flare. I only have one remaining. Anyone know what part # this is?

Thanks in advance!

Pics!

 

[CdaleR4000si]

Check here (hope I can post a link) Clips & Fasteners Auto Body Clips - Auto Body Clips

Click "Hardware", and then click on "Clips and Fasteners", I tried looking through them all, but it was taking forever, they appear to have just about every type of auto body fastener.

 

[Stick Figure]

2000 TOYOTA 4RUNNER Parts - Carson Toyota/Scion/Lexus Ultimate OEM Parts

you can try those guys at least they have the diagram up. give them a call and see if they can find the part number. I spend enough with them that they can give you some free help

 

[RedDragonATL]

2000 TOYOTA 4RUNNER Parts - Carson Toyota/Scion/Lexus Ultimate OEM Parts

you can try those guys at least they have the diagram up. give them a call and see if they can find the part number. I spend enough with them that they can give you some free help

Thanks for that link. My usual online catalog is toyotapartseast.com and they don't seem to have this diagram/section (or at least I haven't found it). I wonder why it is saying Limited and the other non-Limited option is not the SR5 flares, either. I will email or call them and see if I can get a picture of the actual item instead of a vague diagram picture. I wish they showed the part # on there.


Thanks again!

 

[KYMUDD]

Good luck

Man I hope you find one and if you do let us know where and what the part number is. I needed the clip or push clip for the bottom of my flare where the running board end cap goes in and took it to the dealer and they looked at it and orderd me 3 different clips none of which any of them worked. I had to rig one up myself but would like to have the orignal.
Thanks

 

[RedDragonATL]

Check here (hope I can post a link) Clips & Fasteners Auto Body Clips - Auto Body Clips

Click "Hardware", and then click on "Clips and Fasteners", I tried looking through them all, but it was taking forever, they appear to have just about every type of auto body fastener.

I looked through all ~2000 or so clips and this is the closest thing...not a Toyota part. It might work...

Nissan, Cowl Vent Retainer, White Nylon. Top Head Diameter 13mm, Bottom Head Dia Auto Body Clips

I think I am going to go by a body shop I have used before and see if they can find the parts. I will keep you all posted!

 

[RedDragonATL]

OK, well I went by the body shop I've used before today, and he got on the phone with a different Toyota dealer and found me the part #s. Huzzah!

Clip/pin (white one) - 90249-06132 $3.99 ea (!)
Rivet - 90269-04047 $0.83 ea

So, I then called my closer dealership (the one I went to the other day) and got a new parts person to look up these part #s and they had 'em in stock. The rivet doesn't look like I expected. I guess the long black part of the rivet gets cut off by the gun.

I was toldI need a pop rivet gun to attach the rivets...never used one...guess I will be borrowing or buying one soon (depending on how much it costs, of course!). The white pins are all that are really needed to hold it on, cuz the rivets are gone from my driver's side, too, with no noticeable difference. Thought I would be thorough, though and try and do the rivets.

Will post back once it's done!

 

[RedDragonATL]

Oh, and another thing...the parts guy was TOTALLY wrong about these not being Toyota parts. When I went to the body shop, he pointed out the Toyota marks and part # in the flare. Duh...not sure why I didn't start with that.

That part # is 75605-35900.

 

[waketek516]

Cheap pop-rivet gun should be under $20, and is worth owning. I use mine for different stuff all the time!

 

[cordrayj1]

go to sears and get one that will last. i still use my grandfathers from 25+ years ago. for nonprofessional mechanics, i feel you cant go wrong with good ole craftsman