Need some part numbers

[Mr Castulucci]

Hey Guys,

I need a couple part numbers. The first part is the star-shaped clips that are in the rear cargo area.

Another pic:

And I also need the part numbers for the white plastic clips that Toyota likes to put all over the 4Runner.

I have a 2003 4Runner Limited. Thanks in advance guys!

-Frank

 

[iFORCE]

best bet is to ask the toyota parts guy. If I had a list of part numbers I would help you.... best of luck.

ps. K&N FIPK Gen-II Aircharger 57-9022 (+13.53 HP @ 5012 RPM!) how did you get those numbers? you put it on a dyno before and after?

 

[EDGE]

go ask a parts guy, tell him what you need and he'll bring up pictures on the computer and you just point out what you need:

nice sig you got their, your battery already went

 

[Mr Castulucci]

K&N FIPK Gen-II Aircharger 57-9022 (+13.53 HP @ 5012 RPM!) how did you get those numbers? you put it on a dyno before and after?

I got them from the K&N website. I'm sure they are a bit "optimistic", but hey, they make me feel good :-D

And yes, to my knowledge, they dynoed them before and after. They had the charts posted somewhere.

 

[Mr Castulucci]

nice sig you got their, your battery already went

I had this terrible habit of leaving my amp on all the time, and after 7 or 8 complete drains & jumps I decided it was probably time to get a new battery. Whoops!:upset:

 

[iFORCE]

I got them from the K&N website. I'm sure they are a bit "optimistic", but hey, they make me feel good :-D

And yes, to my knowledge, they dynoed them before and after. They had the charts posted somewhere.

 

[PROZAC]

64267-0C010-E1 = Fawn
64267-0C010-B1 = Stone

Expect to pay about 6 a piece.

90467-10161 (there are 5 of these per side of trim that you have bent outwards in the picture)
I think they are .65 a piece.

 

[Mr Castulucci]

iFORCE - yep, that's where I got the numbers from

PROZAC - thanks for the part numbers! That'll save me some time at the dealer.

 

[kglueck]

if you're looking for any other part numbers...

http://www.toyota-4runner.org/showthread.php?s=&threadid=3884



Kev

 

[tomstoyota]

has anyone purchased this? If so what did you pay?

K&N part #57-9022

If you have installed this post pics and results, and could you hear the cold air intake work?

 

[greasefingers]

I wish someone would dyno our engine with nothing attached, just an open throttle body. This number would represent the maximum hp that could ever be expected. Then I would be able to have more confidence in what manufacture

 

[tomstoyota]

adding a cold air intake will always add hp, i just want to know how its performing.